Operation Manual

V-BELT AUTOMATIC TRANSMISSION
5-49
tions of the cam are fitted firmly into the
serrations of the crankshaft.
• Also, make sure that cam is properly
seated.
• Apply grease to the thread and seat of the
primary sheave nut.
TIP
While holding the primary sheave with the
sheave holder “2”, tighten the primary sheave
nut.
EAS4B51025
INSTALLING THE V-BELT CASE
1. Install:
• Oil seal “1”
(into outer V-belt case)
2. Fill the space “b” shown in the illustration
with 10 g (0.35 oz) or more of lithium-soap-
based grease.
3. Install:
• Bearing retainer “1”
TIP
• Install the bearing retainer “1” with its mark
“a” facing outward.
• Apply locking agent (LOCTITE®) to the
threads of the bearing retainer bolt.
Recommended lubricant
Shell Sunlight Grease 3®
Primary sheave nut
160 Nm (16 m·kgf, 116 ft·lbf)
Sheave holder
90890-01481
Installed depth of oil seal “a”
4.0–4.3 mm (0.16–0.17 in)
Bearing retainer bolt
11 Nm (1.1 m·kgf, 8.0 ft·lbf)
LOCTITE®
b
a
1
1
a