Operation Manual

GENERATOR AND STARTER CLUTCH
5-52
* When replacing the crankshaft position sensor or stator coil, replace them as a set.
Removing the stator coil and oil tank
Order Job/Parts to remove Q’ty Remarks
1 Oil tank 1
2 Oil tank gasket 1
3Dowel pin 2
4 Oil strainer 1
5 Crankshaft position sensor 1
6 Stator coil 1
7 Bearing cover 1
8 Oil seal 1
9 Bearing 1
10 Bearing 1
For installation, reverse the removal proce-
dure.