Operation Manual

FUEL TANK
7-4
ECA59C17001
• Be sure to disconnect the fuel hose by
hand. Do not forcefully disconnect the
hose with tools.
• Although the fuel has been removed from
the fuel tank, be careful when removing
the fuel hose, since there may be fuel
remaining in it.
• Do not disconnect the fuel hose from the
fuel hose connector. Disconnect the con-
nector from the fuel pump.
TIP
Before removing the hose, place a few rags in
the area under where it will be removed.
b. Connect the pressure gauge “1” and fuel
pressure adapter “2” to the fuel pump and
the fuel hose “3”.
c. Start the engine.
d. Measure the fuel pressure.
Faulty → Replace the fuel pump.
e. Set the main switch to “OFF”.
f. Remove the pressure gauge and fuel pres-
sure adapter.
TIP
Before removing the special tools, place a few
rags in the area under where they will be
removed.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Pressure gauge
90890-03153
YU-03153
Fuel pressure adapter
90890-03181
YM-03181
1
2
Fuel line pressure (at idle)
220–300 kPa (2.20–3.00 kgf/
cm², 31.3–42.7 psi)