Operation Manual
FUEL INJECTION SYSTEM
8-39
3 Continuity of wire harness Open or short circuit →
Replace the wire harness.
Black/blue–Black/blue
Pink/white–Pink/white
Blue–Blue
Place the main switch to the
ON position, and check the
fault code indication.
No fault code indicated. →
Recovered.
Fault code indicated. →
Check the next step.
4 Sensor installation status
Check the mounting section
for loose or pinched mount-
ing.
Incorrect installation → Rein-
stall or repair the sensor.
Place the main switch to the
ON position, and check the
fault code indication.
No fault code indicated. →
Recovered.
Fault code indicated. →
Check the next step.
Fault code No. 13
Item
Intake air pressure sensor: open or short circuit detected. (no nor-
mal signals are received from the intake air pressure sensor.)
Fail-safe system
Able to start engine
Able to drive vehicle
Diagnostic code No. d:03
Meter display Displays the intake air pressure.
Procedure
Set the engine stop switch to “ ”, and then operate the throttle
while pushing the start switch “ ”. (If the display value changes,
the performance is OK.)
Item/components and
probable cause
Check or maintenance job
Sensor inspection proce-
dure