Operation Manual

ABS (ANTI-LOCK BRAKE SYSTEM)
8-101
TIP
Vehicle possibly ridden on uneven roads.
TIP
Vehicle possibly ridden on uneven roads.
4 Defective sensor rotor. Check the surface of the sensor rotor for damage. If
there is visible damage, replace the sensor rotor.
Refer to “MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR” on page 4-21.
5 Hydraulic unit assembly internal
malfunction.
Replace the hydraulic unit assembly.
Fault code No.
ABS_14
ABS_27
Symptom
Incorrect signal from the rear wheel sensor is
detected.
Order
Item/components and probable
cause
Check or maintenance job
1 Installed condition of wheel sensor. Check for looseness. Repair or replace the wheel
sensor if necessary.
2 Installed condition of wheel bear-
ings, axle, sensor housing, and
sensor rotor.
Check the components for looseness, distortion, and
bends.
Refer to “CHECKING THE REAR WHEEL” on page
4-32.
3 Foreign material inside sensor
housing.
Check the interior of the sensor housing and the sur-
face of the sensor rotor for foreign material, such as
metal particles. Clean the sensor housing and sensor
rotor if necessary.
Refer to “MAINTENANCE OF THE REAR WHEEL
SENSOR AND SENSOR ROTOR” on page 4-33.
4 Defective sensor rotor. Check the surface of the sensor rotor for damage. If
there is visible damage, replace the sensor rotor.
Refer to “MAINTENANCE OF THE REAR WHEEL
SENSOR AND SENSOR ROTOR” on page 4-33.
5 Hydraulic unit assembly internal
malfunction.
Replace the hydraulic unit assembly.
Fault code No.
ABS_13
ABS_26
Symptom
Incorrect signal from the front wheel sensor is
detected.
Order
Item/components and probable
cause
Check or maintenance job