Specifications

...Post 9. Troubleshooting

...Post 10. Appendix

......1. Chart, specifications

......2. Basic CV carb operation: schematic

......3. Starter system: schematic

......4. Pilot jets, comparison chart

......5. Starter pickup tube, photo

......6. BS34 Air jets, photo

......7. BS38 Air jets, photo

......8. Pilot jets and needle, photo

......9. BS38 Mix screws & vacuum ports, photo

.....10. BS34 Mix screw location, photo

.....11. Mix screw & by-pass outlets, photo

.....12. Idle & sync adjustment screws, photo

....13. BS38 Float Variations

Waning! Rebuild kits are produced cheaply to fit a variety of applications, and some

parts found in them will not be correct for your application. Always check parts against

OEM components before installing. Mike's XS is very clear about this but many vendors

are not, assuming that buyers already know. The issue isn't that rebuild kits are

defective; they're generic, and not everything in them is intended to fit every application

listed for the kits.