User Manual
Table Of Contents
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 6.1. Fader parameter
- 6.2. Other parameters (MTX3, MTX5-D)
- 6.3. Other parameters (MRX7-D)
- 7. Parameter List
- 8. Meter List
MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V3.1.0 rev10
24
3. Command Specications
3.3.4. Parameter query
2-10) Raw value parameter query
MTX3,MTX5-D,XMV,EXi8,EXo8
Command Option 1 Option 2 Option 3 Description
get MTX:mem_MemNo/UniqueId/ElmNo/Xpos/
Ypos/PrmNo/IndexNo
0 0 Raw value parameter query
request
Details: MemNo = See section 7, "Parameter List."
UniqueId = See section 7, "Parameter List."
ElmNo = See section 7, "Parameter List."
Xpos = See section 7, "Parameter List."
Ypos = See section 7, "Parameter List."
PrmNo = See section 7, "Parameter List."
IndexNo = See section 7, "Parameter List."
Response
Response string Description
OK get MTX:mem_MemNo/UniqueId/ElmNo/Xpos/Ypos/
PrmNo/IndexNo 0 0 (value)
Raw value parameter query response
Details: MemNo = See section 7, "Parameter List."
UniqueId = See section 7, "Parameter List."
ElmNo = See section 7, "Parameter List."
Xpos = See section 7, "Parameter List."
Ypos = See section 7, "Parameter List."
PrmNo = See section 7, "Parameter List."
IndexNo = See section 7, "Parameter List."
(value) = See section 3.1, "Basic Command Specications," or section 7, "Parameter List."
Example: Command: get MTX:mem_512/60000/0/0/0/0/0 0 0
Response: OK get MTX:mem_512/60000/0/0/0/0/0 0 0 -7760
Meaning: Query the 1ch level of the DCA fader with raw values.
The 1ch level of the DCA fader is -77.60.
MRX7-D
Command Option 1 Option 2 Option 3 Description
get MTX:Index_IndexNo 0 0 Raw value parameter query request
Details: IndexNo = Index number assigned in Remote Control Setup List
Response
Response string Description
OK get MTX:Index_IndexNo 0 0 (value) Raw value parameter query response
Details: IndexNo = Index number assigned in Remote Control Setup List
"(value)" = See section 3.1, "Basic Command Specications," or section 7, "Parameter List."
Example: Command: get MTX:Index_1 0 0
Response: OK get MTX:Index_1 0 0 -7760
(V2.02 or earlier OK get MTX:Index_001 0 0 -7760)
Meaning: Query level of the parameter assigned to Index 1 in Remote Control Setup List using raw values.
Level of the Parameter that is assigned to Index 1 in Remote Control Setup List is -77.60.