User Manual

【Recall】
•
Power on Default
Sets the preset to be recalled when the power supply for the main unit is turned on. Pressing the Set
button in the [Power on Default] dialog sets the currently selected preset.
When no preset has been set, the device starts in the state it was in when it was previously powered off.
To cancel, select Clear in the [Power on Default] dialog.
•
Emergency Recall
Sets the preset to be recalled when the MTX receives an EMG (Emergency) signal from an external device,
or when the input to the +24 V compatible [GPI IN] terminal (IN 16) has dropped below 2.5 V.
The methods for setting and canceling are the same as Power on Default.
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 181