User Manual

Alert
number
Meaning Response
58 Unable to play the specified file or folder in
the SD player.
Verify that the specified audio file or folder exists in the
SD memory card. There must be at least one playable
audio file in the specified folder.
60 A preset recall attempt has failed. Initialize the memory of the device. If this does not
solve the problem, contact your Yamaha dealer.
61 The recall could not be executed because
the preset to be recalled when the MTX
starts up was not found.
Specify a preset that exists. No sound will be output
unless an appropriate preset is recalled.
64 The preset could not be recalled. • The Preset selected for recall cannot be recalled as
no data has been stored to it.
• Another device may have been added after presets
were stored. Please synchronize and check all presets
using ProVisionaire Design, edit as necessary and
store again.
70 Synchronization has not been completed. It
may be that synchronization was halted
before completion.
Perform synchronization again using ProVisionaire
Design. If this does not solve the problem, initialize the
memory of the device and synchronize again. If this
also fails, contact your Yamaha dealer.
71 The UNIT ID settings when synchronization
was performed do not match the current
UNIT ID settings.
Do not change any UNIT ID’s after performing
synchronization. If you’ve changed any UNIT ID’s,
perform synchronization again.
72
(MTX5-D
only)
Because this device has Dante Device Lock
enabled, the settings of device DIP
switches and ProVisionaire Design do not
match current Dante settings.
If you have Dante Device Lock enabled, please disable
using Dante Controller, review device DIP switch
settings and ProVisionaire Design’s Dante settings, and
edit as necessary to match the current situation.
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 211