User Manual

4.
Double-click a device.
The device sheet appears.
5.
Double-click the component that contains the parameter you want to edit.
The component editor appears.
There are two component editors in each device. One is common and the other is unique to the device.
For common component editors, refer to "ProVisionaire Design DME7 Component Guide" .
For device-specific items, refer to the description of the "Component Editor" for each device.
6. Edit the parameters.
7.
Save the project.
You can save by clicking the button on the toolbar.
8.
Make settings for the device’s UNIT ID and Dante [SECONDARY] port.
For details on making these settings, refer to the Owner’s Manual of each device.
9.
Make connections.
3. The basics of using ProVisionaire Design
ProVisionaire Design User Guide | 21