User Manual

14.10. Workflow for paging settings
Up to four PGM1 units can be connected to one MTX5-D unit. One PGM1 becomes the 1st Priority Mic and can
be broadcast with priority over other PGM1s.
Here’s an example of connecting four PGM1 units to the MTX5-D.
The mic that has higher broadcast priority than the other mics is called the 1st Priority Mic (Unit ID = 60). Patch
its output to the MTX5-D’s Dante Input 1Ch.
Patch Mic2-4 (Unit ID=61-63) to Dante Input 2Ch-4Ch of MTX5-D similarly.
Configure Dante settings with Dante Controller.
1. In the “Project” sheet, place the MTX5-D.
2. Select the MTX5-D placed on the “Project” sheet.
Click the displayed when you click the Value column of "PGM1" in the "Properties" area to display the
"PGM1"dialog.
3. Specify the Unit ID (60 to 63) of PGM1.
14. Audio Processors : MTX5-D/MTX3
238 | ProVisionaire Design User Guide