User Manual

17.7. Component editors
When you double-click a component in the device sheet, the component editor opens.
This section describes the XMV series component editor, and the dialogs and windows that are closely
associated with the components. For details about other components, refer to the "ProVisionaire Design DME7
Component Guide"".
Dante model
No.
Component name Details Link
①
Power This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
②
DANTE IN Sends the audio signal input
from the [Dante] terminal.
-
③
ANALOG IN Sends the audio signal input
from the analog input terminal.
-
④
Redundancy Sets the pilot tone detection
setting during Redundant mode.
"Redundancy" component editor
⑤
ATT This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
⑥
Polarity This sets the power supply
standby/ON, mute, polarity, and
attenuator.
"Power/ATT/Polarity" component editor
⑦
SPEAKER OUT Displays the speaker output
terminal’s output voltage and
output current.
"Speaker Out" component editor
17. Power Amplifiers : XMV-series
ProVisionaire Design User Guide | 283