User Manual

[MTX Source Select]
This is a source select function that uses the Matrix Mixer component.
Use Input Ch Send ON in combination with Input Ch Send Level.
Specify the send level to be controlled by the switch to which Input Ch Send ON is assigned, and operate that
send level with the knob or switch to which Input Ch Send Level is assigned.
Input Ch Send ON
Changes the source (Parameter2) on/off for any output (Parameter1) of the Matrix Mixer component at once.
Parameter2 changes its state to "ON", "OFF", and "IGNORE" each time the checkbox is clicked.
Only one source can be turned "ON".
Example :
Assign DCP4V4S switches 1 and 2 to [MTX Source Select] > Input Ch Send ON, and knob 1 to [MTX Source
Select] > Input Ch Send Level.
They all select the same output (Parameter1).
If switch 1 is pressed, the send level of CH1 for zone 1 is assigned to knob 1.
If switch 2 is pressed, knob 1 changes to CH2 send level for zone 1.
26. DCP
ProVisionaire Design User Guide | 337