User Manual

MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V2.2.0 rev8
14
3. Command Specications
1-15) DST enable change notication
Command Option 1 Option 2 Description
NOTIFY event MTX:DSTSetEnable "enable" DST enable
"disable" DST disable
Example: Notication: NOTIFY event MTX:DSTSetEnable "enable"
Meaning: DST was enabled
1-16) DST offset time change notication
Command Option 1 Option 2 Description
NOTIFY event MTX:DSTSetOffset "offset=hh:mm" DST offset time change notication
Details: hh = Hour (0 to 2)
mm = Minute (0 to 59)
Example: Notication: NOTIFY event MTX:DSTSetOffset "01:00"
Meaning: DST offset was set one hour
1-17) DST start time change notication
Command Option 1 Option 2 Description
NOTIFY event MTX:DSTSetStartTime "time=hh:mm" DST start time change notication
Details: hh = Hour (0 to 23)
mm = Minute (0 to 59)
Example: Notication: NOTIFY event MTX:DSTSetStartTime "time=12:00"
Meaning: DST start time was set to 12:00
1-18) DST end time change notication
Command Option 1 Option 2 Description
NOTIFY event MTX:DSTSetEndTime "time=hh:mm" DST end time change notication
Details: hh = Hour (0 to 23)
mm = Minute (0 to 59)
Example: Notication: NOTIFY event MTX:DSTSetEndTime "time=12:00"
Meaning: DST end time was set to 12:00
1-19) DST start/end day change notication (day/week)
Command Option 1 Option 2 Description
NOTIFY event MTX:DSTSetDayWeek "s_weekindex=xxxx|s_day=yyyy|s_month=zzzz|
e_weekindex=uuuu|e_day=vvvv|e_month=wwww"
DST start/end day change
notication (day/week)
Details: xxxx = Start week (First, Second, Third, Fourth, Fifth, Last)
yyyy = Start day (Sun, Mon, Tue, Wed, Thu, Fri, Sat)
zzzz = Start month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
uuuu = End week (First, Second, Third, Fourth, Fifth, Last)
vvvv = End day (Sun, Mon, Tue, Wed, Thu, Fri, Sat)
wwww = End month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
Example: Notication: NOTIFY event MTX:DSTSetDayWeek "s_weekindex=Last|s_day=Sun|s_month=Mar|
e_weekindex=Last|e_day=Sun|e_month=Oct"
Meaning: DST start/end days were set as from last Sunday in March to last Sunday in October