User Manual

MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V4.0.0 rev14
44
3. Command Specications
3-30) File name query
Command Option 1 Option 2 Description
event MTX:AudioPlayerGetFileName "leindex=xxxx" File name query
Details: xxxx = File index number
Note: The range of index numbers is "0" to "total number of les - 1".
Use "3-27) Current folder information query" or "3-28) Current folder move query" to get total number of les.
Response
Response string Description
OK event MTX:AudioPlayerGetFileName "lename=xxxx" File name
OKm event MTX:AudioPlayerGetFileName "sdcard is not inserted" There is no SD memory card inserted.
* OKm is returned if there is no SD memory card inserted.
Details: xxxx = File name
Example: Command: event MTX:AudioPlayerGetFileName "leindex=1"
Notication: OK event MTX:AudioPlayerGetFileName "lename=xxxx.mp3"
Meaning: Query the le name of le index number 1 (index expression).
The le name is "xxxx.mp3".
3-31) Folder name list query
Command Option 1 Option 2 Description
event MTX:AudioPlayerGetDirNameList "dirindex=XXXX-xxxx" Folder name list: Multiple folder name
query
Details: XXXX = the rst index number of desired range for list (index expression)
xxxx = the last index number of desired range for list (index expression)
→ Cannot be set to a value greater than the number of folders.
→ The rst number cannot be greater than the last number.
→ By changing the rst and last numbers, you can query the list of folder names in that range.
Note: "XXXX" should be 0 or greater.
"xxxx" should be smaller total number of sub folders - 1 or smaller.
Use "3-27) Current folder information query" or "3-28) Current folder move query" to get total number of sub folders.
Response
Response string Description
OK event MTX:AudioPlayerGetDirNameList "dirindex=XXXX-xxxx|dirname0=yyyy| ... " Folder name list
OKm event MTX:AudioPlayerGetDirNameList "sdcard is not inserted" There is no SD memory card inserted.
* OKm is returned if there is no SD memory card inserted.
Details: XXXX = the rst index number of desired range for list (index expression)
xxxx = the last index number of desired range for list (index expression)
yyyy = Directory names
Example: Command: event MTX:AudioPlayerGetDirNameList "dirindex=0-1"
Notication: OK event MTX:AudioPlayerGetDirNameList "dirindex=0-1|dirname0=Folder #1|dirname1=Folder #2"
Meaning: Query the directory names of folder list number 0 and 1 (index expression).
The directory name of folder list number 0 is "Folder #1", and that of folder list number 1 is "Folder #2".