User Manual
Table Of Contents
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 6.1. Fader parameter
- 6.2. Other parameters (MTX3, MTX5-D)
- 6.3. Other parameters (MRX7-D)
- 7. Parameter List
- 8. Meter List
MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V4.0.0 rev14
45
3. Command Specications
3-32) File name list query
Command Option 1 Option 2 Description
event MTX:AudioPlayerGetFileNameList "leindex=XXXX-xxxx" Folder name list: Multiple le name
query
Details: XXXX = the rst index number of desired range for list (index expression)
xxxx = the last index number of desired range for list (index expression)
→ Cannot be set to a value greater than the number of les.
→ The rst number cannot be greater than the last number.
→ By changing the rst and last numbers, you can query the list of le names in that range.
Note: "XXXX" should be 0 or greater.
"xxxx" should be smaller total number of sub folders - 1 or smaller.
Use "3-27) Current folder information query" or "3-28) Current folder move query" to get total number of les.
Response
Response string Description
OK event MTX:AudioPlayerGetFileNameList "leindex=XXXX-xxxx|lename0=yyyy| ... " File name list
OKm event MTX:AudioPlayerGetFileNameList "sdcard is not inserted" There is no SD memory card inserted.
* OKm is returned if there is no SD memory card inserted.
Details: XXXX = the rst index number of desired range for list (index expression)
xxxx = the last index number of desired range for list (index expression)
yyyy= File names
Example: Command: event MTX:AudioPlayerGetFileNameList "leindex=0-1"
Notication: OK event MTX:AudioPlayerGetFileNameList "leindex=0-1|lename0=xxxx.mp3|lename1=xxxx2.mp3"
Meaning: Query the le names of le list number 0 and 1 (index expression).
The le name of le list number 0 is "xxxx.mp3", and that of le list number 1 is "xxxx2.mp3".
3-33) Song play mode query
Command Option 1 Option 2 Description
event MTX:AudioPlayerGetPlayMode "" Queries the play mode
Response
Response string Description
OK event MTX:AudioPlayerGetPlayMode "playmode=one" One song play mode
OK event MTX:AudioPlayerGetPlayMode "playmode=repeat one" One song repeat
OK event MTX:AudioPlayerGetPlayMode "playmode=all" All song play
OK event MTX:AudioPlayerGetPlayMode "playmode=repeat all" All songs repeat
OK event MTX:AudioPlayerGetPlayMode "playmode=shufe" Shufe repeat
OKm event MTX:AudioPlayerGetPlayMode "sdcard is not inserted" There is no SD memory card inserted.
* OKm is returned if there is no SD memory card inserted.
Example: Command: event MTX:AudioPlayerGetPlayMode ""
Notication: OK event MTX:AudioPlayerGetPlayMode "playmode=one"
Meaning: Query the play mode.
The play mode is set to one song play mode.