Operation Manual

6-11
1
2
3
4
5
6
7
8
9
7. Install the new oil filter, new O-
ring and the oil filter cover.
Tighten the oil filter cover
bolts to the specified torque.
NOTE:
Make sure the O-ring is seated
properly.
8. Fill the engine with oil. Install
the oil filler cap and tighten it.
Tightening torque:
Oil filter cover bolt:
10 Nm (1.0 m·kg)
PERIODIC MAINTENANCE AND MINOR REPAIR
4. Remove the oil filter cover
bolts and the oil filter cover.
1. Oil filter cover bolt (×3)
5. Remove the oil filter and O-
ring.
6. Reinstall the drain plug and
tighten it to the specified
torque.
1. Oil filter
2. O-ring
1
2
1
Tightening torque:
Drain plug:
32 Nm (3.2 m·kg)
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 42