Owner`s manual

INSTRUMENT AND CONTROL FUNCTIONS
4-6
4
NOTICE
ECA11590
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
This function allows you to adjust the
brightness of the speedometer panel to
suit the outside lighting conditions.
To set the brightness
1. Turn the key to “OFF”.
2. Push and hold the “” side of the
“SELECT” switch.
3. Turn the key to “ON”, and then re-
lease the “SELECT” switch after
five seconds or more.
4. Push the “” or “” side of the
“SELECT” switch to select the de-
sired brightness level.
5. Push the “RESET” switch to con-
firm the selected brightness level.
The display will return to the odom-
eter or tripmeter mode.
EAU12348
Handlebar switches
Left
1. Speedometer panel
2. Brightness level display
1
2
1. Dimmer switch “ / ”
2. Turn signal switch “ / ”
3. Horn switch “”
1
2
3
U1BH10E0.book Page 6 Tuesday, December 8, 2009 4:47 PM