Operation Manual

7-15
D:\Yuki-Data\Yuki_YMC\HM02L006_XV250P-E2\English\E-7.fm
R
1. Spark plug gap
When installing the spark plug, always clean
the gasket surface and use a new gasket.
Wipe off any grime from the threads and tight-
en the spark plug to the specified torque.
EUU03802
N
O
TE:
If a torque wrench is not available when you
are installing a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 turn past finger
tight. Have the spark plug tightened to the
specified torque as soon as possible.
EAH80104
Front brake lever free play adjustment
The free play at the front brake lever should
be 2 ~ 5 mm.
1. Loosen the locknut.
2. Turn the adjusting bolt in direction
a
to
increase free play or in direction
b
to de-
crease free play.
3. After adjusting, tighten the locknut.
Spark plug gap:
0.6 ~ 0.7 mm
Tightening torque:
Spark plug:
12.5 Nm (1.25 m·kgf)