Operation Manual

7-35
D:\Yuki-Data\Yuki_YMC\HM02L006_XV250P-E2\English\E-7.fm
R
3. Make sure the slot in the speedometer
gear unit fits over the stopper on the front
fork outer tube.
4. Make sure the wheel axle is properly
torqued.
5. Tighten the pinch bolt.
6. After tightening the pinch bolt, push down
the front fork several times to check for
proper fork operation.
EAJ31202
Rear wheel removal
EUU66201
WARNING
It is advisable to have a Yamaha dealer
service the wheel.
EUU65700
WARNING
Securely support the motorcycle so there
is no danger of it falling over.
1. Elevate the rear wheel by placing a suit-
able stand under the engine.
2. Remove the cotter pin, nut and tension
bar bolt from the brake shoe plate.
Tightening torque:
Wheel axle:
59 Nm (5.9 m·kgf)
Pinch bolt torque:
20 Nm (2.0 m·kgf)