Operation Manual

7-36
D:\Yuki-Data\Yuki_YMC\HM02L006_XV250P-E2\English\E-7.fm
L
1. Tension bar 2. Cotter pin
3. Nut (tension bar bolt) 4. Brake rod
5. Brake adjuster
3. Remove the brake adjuster and brake
rod from the brake cam lever.
4. Loosen the locknuts and chain adjusters
on each side.
1. Axle nut 2. Cotter pin 3. Locknut
4. Adjuster 5. Alignment marks
5. Remove the axle nut cotter pin and the
axle nut.
6. Pull out the wheel axle and remove the
wheel assembly.
EUU05600
N
O
TE:
You do not have to disassemble the chain in
order to remove or install the rear wheel.