Motorcycle Owner's Manual
Table Of Contents
- XVS13AW(C) Owner's Manual
- Introduction
- Important Manual Information
- Table of Contents
- Chapter 1 Safety Information
- Chapter 2 Description
- Chapter 3 Instrument and Control Functions
- Chapter 4 Pre-Operation Checks
- Chapter 5 Operation and Important Riding Points
- Chapter 6 Periodic Maintenance and Minor Repair
- Chapter 7 Motorcycle Care and Storage
- Chapter 8 Specifications
- Chapter 9 Consumer Information
- Index
PERIODIC MAINTENANCE AND MINOR REPAIR
6-33
6
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the headlight unit by install-
ing the bolts.
8. Place the turn signal/position light
bracket cover in the original posi-
tion, and then install the bolts.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24131
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
1. Do not touch the glass part of the bulb.
1. Screw
U3D810E0.book Page 33 Wednesday, July 19, 2006 11:14 AM