Operation Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
6
10
*
Wheels
• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
√√√√
11
*
Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√√√ √
12
*
Wheel bearings • Check bearing for looseness or damage. √√√√
13
*
Swingarm
• Check operation and for excessive play. √√√√
• Lubricate with lithium-soap-based grease. Every 50,000 km
14
*
Steering bearings
• Check bearing play and steering for roughness. √√√√√
• Lubricate with lithium-soap-based grease. Every 20,000 km
15
*
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. √√√√ √
16 Sidestand
• Check operation.
• Lubricate.
√√√√ √
17
*
Sidestand switch • Check operation. √√√√√ √
18
*
Front fork • Check operation and for oil leakage. √√√√
19
*
Shock absorber
assembly
• Check operation and shock absorber for oil leakage. √√√√
20
*
Carburetors
• Check starter (choke) operation.
• Adjust engine idling speed and synchronization.
√√√√√ √
21 Engine oil
• Change. √√√√√ √
• Check oil level and vehicle for oil leakage. √√√√√ √
22 Engine oil filter element • Replace. √√√
23 Final gear oil
• Check oil level and vehicle for oil leakage. √√ √
• Change. √√√
24
*
Front and rear brake
switches
• Check operation. √√√√√ √
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (× 1,000 km)
ANNUAL
CHECK
1 10203040
U5SCE0.book Page 3 Thursday, June 7, 2001 11:24 AM