Operation Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6-20
6
3. If the specified clutch lever free
play could be obtained as de-
scribed above, tighten the locknut
and skip the rest of the procedure,
otherwise proceed as follows.
4. Fully turn the adjusting bolt at the
clutch lever in direction
a
to loos-
en the clutch cable.
5. Loosen the locknut at the crank-
case.
6. To increase the clutch lever free
play, turn the adjusting nut in di-
rection
a
. To decrease the clutch
lever free play, turn the adjusting
nut in direction
b
.
7. Tighten the locknut at the clutch
lever and the crankcase.
EAU00696
Adjusting the brake lever free
play
The brake lever free play should mea-
sure 10–15 mm as shown. Periodically
check the brake lever free play and, if
necessary, adjust it as follows.
1. Loosen the locknut at the brake
lever.
2. To increase the brake lever free
play, turn the adjusting bolt in di-
rection
a
. To decrease the brake
lever free play, turn the adjusting
bolt in direction
b
.
3. Tighten the locknut.
1. Clutch lever free play adjusting nut
2. Locknut
a. Brake lever free play 1. Locknut
2. Brake lever free play adjusting bolt
U5SCE0.book Page 20 Thursday, June 7, 2001 11:24 AM