Setting Up DIGITAL KEYBOARD Appendix Reference Quick Guide Owner’s Manual Thank you for purchasing this Yamaha Digital Keyboard! The instrument is a portable keyboard with featuring a wide variety of sounds and functions. We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference.
For PSR-E463/PSR-EW410 SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
For AC adaptor and PSR-E463/PSR-EW410 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
For AC adaptor This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) (can_b_02) Explanation of Graphical Symbols CAUTIO N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For AC adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. • Indoor use only. Do not use in any wet environments. • When setting up, make sure that the AC outlet is easily accessible.
• Keep batteries away from small children who might accidentally swallow them. Battery • If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns. • Follow the precautions below. Failure to do so might result in explosion, fire, overheating or battery fluid leakage.
• Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use.
Table of Contents Special Features.............................................................. 8 Compatible Format and Functions................................. 10 Included Accessories..................................................... 10 About the Manuals......................................................... 11 Setting Up Setting Up Panel Controls and Terminals 12 Setting Up 14 Power Requirements ..................................................... 14 Turning the Power On/Off................
Backup and Initialization 49 Backup Parameters ....................................................... 49 Initializing the Instrument ............................................... 49 Song Settings Reference Handy Performance Features 50 Selecting a Reverb Type ............................................... 50 Selecting a Chorus Type ............................................... 50 Pitch Controls—Transpose............................................ 51 Pitch Controls—Fine Tuning...................
Compatible Format and Functions Setting Up GM System Level 1 “GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer. The GM mark is affixed to all software and hardware products that support GM System Level. XGlite As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation format.
About the Manuals Setting Up This instrument has the following documents and instructional materials. NOTE • The illustrations and displays as shown in this manual are based on the PSR-E463. • Please note that the PSR-E463 and PSR-EW410 have different numbers of keys: the PSR-E463 has 61 keys, and the PSR-EW410 has 76 keys. Included Documents Owner’s Manual (this book) • Setting Up Please read this section first. • Quick Guide This section explains how to use the basic functions.
Panel Controls and Terminals Setting Up Front Panel The illustration is of the PSR-E463. Dial (page 18) Setting Up e r t y u i o !0 !5 !4 q w !1 !3 !6 !8 !7 !9 @0 @1 !2 Display (page 19) • Voice List (Data List) • Style List (Data List) • Song List (Data List) • Groove List (Data List) @5 As illustrated, each note of the keyboard has a specific note number and name (e.g., 036/C1), which is used in making various settings, such as Split Point (page 62).
Panel Controls and Terminals !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2 @3 @4 @5 [ ] (Standby/On) switch .................... page 16 [MASTER VOLUME] control ................. page 16 [QUICK SAMPLING] button .................. page 20 [DEMO] button....................................... page 28 [TRANSPOSE] button ........................... page 51 [MELODY SUPPRESSOR] button......... page 46 [AUDIO] button ...................................... page 41 [REC] button..........................................
Setting Up Power Requirements Plug Setting Up Although the instrument will run either from an AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. NOTICE • You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable enough to last through these crucial operations. Using an AC Adaptor Slide the plug as indicated.
Setting Up PSR-EW410 NOTE Setting Up • This instrument cannot charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument. Setting the battery type 3 Insert the six new batteries, putting them in the correct direction according to the illustration.
Setting Up Turning the Power On/Off Setting Up 1 Turn down the [MASTER VOLUME] control to “MIN”. 1 2 NOTICE • When the instrument is not operated for a specified period of time while connected to an external device such as an amplifier, speaker or computer, make sure to follow the instructions in the Owner’s Manual to turn off the power to the instrument and the connected devices, in order to protect the devices from damage.
Setting Up Using a Keyboard Stand Setting Up The following keyboard stands (sold separately) can be used. • PSR-E463: L-2C • PSR-EW410: L-6 When using the L-6 Keyboard Stand (PSR-EW410) The exterior size of PSR-EW410 exceeds the limits as described in the L-6 Assembly Instructions. However, we have determined through tests that the stand can be safely used for the instrument. When setting the instrument, place it on the center of the stand as shown in the illustration.
Basic Operation and Display Items Quick Guide Basic Operation This instrument features four basic functions: Voice, Style, Song and Groove Creator. To use this instrument, select a basic function first, and then make various settings. 1 Select a basic function. 2 Select an item or value. Quick Guide Dial Rotate the dial clockwise to increase the value of the selected item, or counterclockwise to decrease it’s value. 3 Start a function or play the keyboard.
Basic Operation and Display Items Display Items The display shows all the current settings of the Song, Style, Groove, Voice and other related functions. The illustration is from the PSR-E463. Notation Normally this indicates the notes you play. NOTE • Any notes occurring below or above the staff are indicated by “8va.” • For a few specific chords, not all notes may be shown, due to space limitations in the display.
Try Playing a Variety of Instrument Voices This instrument features various instrumental Voices including piano. Not only can you play just one single Voice (Main Voice), but you can also layer a different Voice (Dual Voice) to the Main Voice, or play a different Voice (Split Voice) in the left-hand area of the keyboard from the right-hand area. Selecting a Main Voice 1 Press the [VOICE] button. The Voice number and name will be shown.
Try Playing a Variety of Instrument Voices Playing a Split Voice in the Left Hand area By dividing the keyboard into the two separate areas, you can play a different Voice between the Left hand and Right hand areas. 1 Using the Metronome This instrument features a built-in metronome which can be used when practicing. 1 Press the [METRONOME] button to start the metronome. Press the [SPLIT] button to turn Split on. Appears when Split is on 2 Press the [METRONOME] button again to Split Point ...
Try Playing a Variety of Instrument Voices 2 Rotate the dial to select the number of beats per measure. A chime will sound on the first beat of each measure while a click sounds the other beats. If “0” is selected, a click sounds for all beats with no chime accent. Select 6 for this example. NOTE • This parameter cannot be set during playback of a Style, Song or Groove. 3 Press the CATEGORY [>>] button once to call up “TimeSigD” (Time Signature Denominator).
Try Playing a Variety of Instrument Voices NOTE • When Split (page 21) is on, Arpeggio is applied only to the Split Voice. When Split is off, Arpeggio is applied to the Main and Dual Voices. Arpeggio cannot be applied to the Split and Main/Dual Voices simultaneously. • Selecting a Voice number between 292 and 301 will turn on Split automatically, as well as Arpeggio.
Try Playing a Variety of Instrument Voices 3 Rotate the dial to select a DSP type. Adding DSP Effects For information about the available DSP types, refer to the Effect Type List in the Data List. DSP is an abbreviation for Digital Signal Processor, and provides effects that enhance the sound. DSP effects are applied only to a specified target as described below. 4 Press [KNOB ASSING] button to select Parts to which DSP effects are applied 5 Press the [TARGET] button and select the target.
Creating Original Sounds via the Knobs The two knobs can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired pre-programmed function combination printed above the knobs, then rotate the knobs as you play, for an expressive, dynamic performance. Assigning Functions to the Knobs Repeatedly press the [KNOB ASSIGN] button to sequentially assign the function combinations provided: z x c v b z … etc.
Playing Styles This instrument includes an Auto Accompaniment feature that plays appropriate “Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety of Styles covering a wide range of musical genres. 1 Press the [STYLE] button, then use the dial to select the desired Style. 3 Press the [SYNC START] button to turn Synchro Start on. For the Style List, refer to the online material Data List. EuTrance 062 Style Name BritRock Flashes when sync start is on.
Playing Songs This instrument can play Preset Songs, Songs you recorded on this instrument, or commercially available Songs. In addition to listening to these Songs, you can play the keyboard along with the Song as it plays back. MIDI Data A MIDI Song is comprised of your keyboard performance information and is not a recording of the actual sound itself. The performance information refers to which keys are played, at what timing, and at what strength—just as in a musical score.
Playing Songs NOTE Listening to a Demo Song • External MIDI Songs containing Portamento Control and Scale Tune settings may not be played correctly. • If playback of a Song in the USB flash drive or a Song transferred from a computer produces distorted sound, decrease the Song volume (page 65) to reduce the distortion, and then adjust the master volume (page 16). Press the [DEMO] button to play Demo Songs 001– 003 in sequence. Playback will repeat continuously, starting again from the first Song (001).
Playing Songs Playing a Specified Section of a Song Repeatedly (A-B Repeat) You can play back only a specific section of a Song repeatedly by setting the A point (start point) and B point (end point) in one-measure increments. Each “track” of a Song plays a different part—melody, percussion, accompaniment, etc. Each of the tracks can be muted so that you can play the muted part yourself. Pressing the desired Track button repeatedly will toggle the on/off status. B 1 Start playback of the Song (page 28).
Playing with Groove Creator The Groove Creator function lets you repeatedly play back various rhythm patterns and phrases (each called a Groove) in various genres, including Hip Hop, House, etc.—for dynamic, powerful performances. Try out the expressive performance features, such as changing keys in the left-hand area of the keyboard and rotating the knobs for dynamic sound variations. 1 Press the [GROOVE CREATOR] button, and use the dial to select the desired Groove.
Playing with Quick Sampling This instrument features an extremely convenient and powerful Quick Sampling function. It allows you to sample sounds from an external audio device (such as a computer, smartphone, portable music player, etc.) via the [AUX IN] jack, and then assign the sampled sound to the keyboard for playing back as part of your performance.
Playing with Quick Sampling The SAMPLING icon and “PressKey” appear on the display. Stereo mini plug Headphone jack Audio cable Stereo mini plug NOTE • To cancel and exit from the Quick Sampling mode, press the [QUICK SAMPLING] button again. 2 Press a key in the desired Sample Zone to which the sample is to be assigned. Pressing the key will sound the default sample or previously assigned sample. To sample a “Normal” type: 2-1 Press one of the keys in Sample Zone A.
Playing with Quick Sampling 3 Pause playback on the external device at the beginning of the sound or phrase you want to sample. 4 Press the [REC] button, and then start playback on the external device to start sampling. While sampling the sound, “REC” appears and glowing icon of selected the Sample Zone on the display. Sampling ple can be automatically cut by the Blank Cut function (page 69). If you are not satisfied with the sample, return to step 2 and try sampling again.
Playing with Quick Sampling Restoring the Default Samples This operation lets you restore the default samples. However, keep in mind that this deletes the samples you’ve assigned to each Sample Zone. If you want to save your samples before restoring the default ones, see the next section (“Saving Samples to a USB Flash Drive”). 1 Press the [QUICK SAMPLING] button to enter the Quick Sampling mode.
Playing with Quick Sampling Loading a Sample from a USB Flash Drive IMPORTANT • If the instrument is in the Quick Sampling mode, press the [QUICK SAMPLING] button to exit from the mode, and then follow the steps below. 10 Try playing with the loaded samples. Press the [VOICE] button and select the Voice number 759 “Smpl Vce” for the Main Voice. Pressing the appropriate key in the Sample Zone (to which you assigned the sample) to play the sound.
Playing Like a DJ! The dynamic Groove Creator function and Live Control Knobs give you powerful tools to sound just like a pro DJ! Since the Grooves and section variations change seamlessly without breaks in the rhythm, performing is truly easy. Still, a sense of rhythm is important. So, turn up the volume, feel the rhythm in your body, and work the buttons and knobs—as if you were in front of the dance floor! In this example using Groove number 001 (Elec Dnc.
Playing Like a DJ! 6 slowly with the rhythm. Notice that you can get a completely different sound and feel, even with the same rhythmic phrase. As in the steps above, press the [KNOB ASSIGN] button and try using the second and third items. REVERB/CHORUS controls the acoustic ambience, or produces a rich and warm layered effect. DSP controls one of 10 different effects, such as rotary speaker and distortion. For details, refer to page 57.
Recording Your Performance You can record up to 10 of your performances to the instrument as User Songs. The recorded User Songs can be played back in the same way as the preset Songs. NOTE • For details on Audio recording, refer to page 42. • This instrument records your performance and saves it in an original format. If you want to save it as MIDI data, convert it to SMF by saving it to the connected USB flash drive (page 73). Track Structure of a Song A Song can be recorded to the six tracks.
Recording Your Performance ] (Start/Stop) or [REC] button to stop recording. Recording to a Specified Track When using a Style or a Groove, you can stop recording also by pressing the [INTRO/ENDING/ rit.] or [MUSICAL CLIMAX] button, and then waiting until playback ends. This section explains how to record to a specified track. This is useful when you want to record additional performances to an already recorded Song, or re-record only one track of an already recorded Song.
Recording Your Performance If you want to record only the Groove playback: Press the [GROOVE CREATOR] button, and then select the desired Groove. While holding down the [REC] button, press the [A] button. ACMP is automatically turned on. 4 Press the [+/YES] button to clear the Song. An in-progress message will appear briefly on the display. Clearing a Specified Track from a User Song This lets you clear individual tracks from a User Song.
Audio Playback and Recording This instrument allows you to play back audio files and record your performances in audio format. The recorded performance can be saved to a USB flash memory as an audio file. Audio file An audio file is a recording of the performed sound itself. This data is recorded in the same way as that used in recording with voice recorders, etc. This data can be played with a portable music player, etc., allowing you to easily let other people hear your performance.
Audio Playback and Recording Recording/Saving Audio Files to a USB Flash Drive You can record your performance and save it as an audio file to the USB flash drive. IMPORTANT • Connect an AC adaptor to use this function. NOTICE • Do not disconnect the USB flash drive or turn off the power to the instrument during recording. Otherwise, damage to the data may occur. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal. Quick Guide For details, refer to “Connecting a USB Flash Drive” on page 71.
Audio Playback and Recording Deleting Audio Files from the USB Flash Drive 7 Press the [FUNCTION] button to exit from the File Control display. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal. 2 Hold the [FUNCTION] button for longer than a second to call up the File Control display. Quick Guide If the instrument is in the Audio mode, press the [AUDIO] button to exit from the Audio mode, and then execute this operation. Hold for longer than a second.
Memorizing Your Favorite Settings (Registration Memory) The Registration Memory function allows you to save (or “register”) panel settings such as Voice and Style to a Registration Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for four Registration Memory buttons will be saved as a single Bank. 8 Banks Memory 1 Memory 2 Memory 3 Memory 4 Up to 32 settings (eight banks of four each) can be memorized.
Connecting to Other Devices CAUTION • Before connecting the instrument to external devices, turn off the power of all the devices. Also, before turning the power on or off, make sure to set all volume levels to minimum. Otherwise, damage to the devices or electrical shock may occur. Connecting Headphones or an External Device Using a Pedal (Sustain) You can produce a natural sustain as you play by pressing a footswitch (FC5 or FC4A; sold separately) plugged into the [SUSTAIN] jack.
Connecting to Other Devices Playing an External Audio Device with the Built-in Speakers By connecting an audio device such as a portable music player to the instrument’s [AUX IN] jack, you can output the sound of the audio device through the built-in speakers of this instrument. This lets you play the keyboard along with the playback of your audio player, for practice or performance. the [MASTER VOLUME] control of the instrument.
Connecting to Other Devices Connecting the [USB TO HOST] terminal of this instrument and the computer or smart device allow you to use various function with just one USB cable, such as sending/receiving data with high sound quality, using the app of smart device, etc. The range of the instrument can do is extended. For details on using a computer or smart device, refer to the online PDF manual (page 11) “Computer-related Operations” or “iPhone/iPad Connection Manual.
Connecting to Other Devices Using an External Stereo System for Playback (OUTPUT [L/L+R]/[R] jacks) (PSR-EW410) You can connect a stereo system to amplify the instrument’s sound by using the OUTPUT [L/L+R]/ [R] jacks. Powered speaker Speaker Mute On/Off Setting (PSR-EW410) You can set whether the sound of this instrument is always output from its built-in speaker or not. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [<<] and [>>] but- tons to call up “SP Mute” (Function 063).
Backup and Initialization Backup parameters (each time) • Use Songs (page 38) • Style data transferred from a computer and loaded to Style numbers 221–230 (page 75) • Assigned Sample to keyboards (page 35) Backup parameters when turning off the power • Registration Memory (page 44) • FUNCTION Settings: (page 66) Style Volume, Song Volume, Groove Volume, Audio Input Volume, Tuning, Split Point, Touch Response, Master EQ Type, Audio Loop Back on/off, Blank Cut on/off, Metronome Volume, Demo Group, Demo Play
Handy Performance Features Reference Selecting a Reverb Type Selecting a Chorus Type The Reverb effect lets you play with a rich concert hall type ambience. Although selecting a Style or Song will call up the optimum Reverb type for the entire sound, you can select a different Reverb type manually. The Chorus effect creates a thick sound that sounds like many of the same Voices being played in unison.
Handy Performance Features Pitch Controls—Transpose The overall pitch of the instrument (except for the Drum Kit Voices and Sample Voice) can be shifted up or down by a maximum of 1 octave in semitone increments. 1 Press the [TRANSPOSE] button to call Pitch Controls—the [PITCH BEND] wheel The [PITCH BEND] wheel can be used to add smooth pitch variations to notes you play on the keyboard. Roll the wheel upward to raise the pitch, or downward to lower the pitch. up “Transpos” (Function 006).
Handy Performance Features Changing the Touch Response of the Keyboard Selecting an EQ Setting for the Best Sound The keyboard of this instrument is equipped with a Touch Response feature that lets you dynamically and expressively control the level of the Voices according to your playing strength.
Scale Tuning By default, the scale of this keyboard is set to Equal Temperament — the same tuning as with any acoustic piano. However, the setting can be changed to any other scale according to the music genre or style in which you want to play. Selecting a Scale You can select a desired scale among the various preset scales. 1 Press the [FUNCTION] button.
Scale Tuning Tuning Each Note to Create an Original Scale You can tune the individual notes in cents (a “cent” is 1/100th of a semitone) to create your own original scale. 1 Press the [FUNCTION] button. 5 Rotate the dial to tune the note over a range of -64 to +63. The setting can be reset to the initial default value by pressing the [+/YES] and [-/NO] buttons simultaneously. 6 Repeat steps 2–5 as desired. 7 Memorize the settings here to a Registration Memory as desired (page 44).
Voice Settings Selecting a Dual Voice Voice Editing 1 Hold down the [DUAL] button for longer than a second to call up “D.Voice” (Function 020). After a few seconds, the current Dual Voice appears. D.Voice 020 Each of the Main, Dual and Split Voices can be edited, with available parameters including volume, octave and Reverb/Chorus depth—allowing you to create new, custom sounds to best suit your own musical preferences. 1 Press the [FUNCTION] button. Hold for longer than a second.
Arpeggio Settings Synchronizing an Arpeggio to Song/Style/Groove Playback— Arpeggio Quantize When you play the keyboard to trigger an Arpeggio (page 22) along with Song/Style/Groove playback, you’ll need to play the notes with correct timing to keep the Arpeggio in synchronization with the other playback tracks. However, your actual timing may be slightly ahead of or behind the beat (or both).
Parameters Assigned to the Knobs This section describes each of the parameters which can be assigned to the Knobs (page 25). z CUTOFF/RESONANCE These effects shape the sound by allowing only a specified range of frequencies to pass and/or by producing a resonance peak at the “cutoff” frequency. These effects can be used to create a range of synthesizer-like sounds. Knob B: CHORUS Produces a rich and warm layered effect. Turning the knob to the right increases the Chorus depth.
Parameters Assigned to the Knobs b VOLUME BALANCE/RETRIGGER RATE Knob A: VOLUME BALANCE Adjusts the volume balance between the audio playback volume from the connected audio device (page 46) or the computer (page 47) and the Song/Style/Groove. Turning the knob to the left decreases the external audio volume, while turning it to the right decreases the instrument volume. Even when there is no audio input from an external device, the volume of Song, Style and Groove can be adjusted by using the knob.
Style and Groove Settings Style Variations—Sections Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the song you are playing. INTRO MAIN A/B ENDING AUTO FILL INTRO This is used for the beginning of the Song. When the Intro finishes, Style playback shifts to the Main section. The length of the Intro (in measures) differs depending on the selected Style. MAIN This is used for playing the main part of the Song.
Style and Groove Settings 5 Press the [INTRO/ENDING/rit.] button. INTRO≥A Now, you’re ready to start Style playback of the Intro and then the Main A (or B) section. Style Synchro Stop When you press the [SYNC STOP] button to turn on this function, the Style will only play while pressing chords in the Auto Accompaniment area of the keyboard. Releasing all the notes will stop Style playback. 6 Play a chord with your left hand to start playback of the Intro.
Style and Groove Settings Groove Variations—Sections Changing the Tempo Like the Styles, each Groove features several Sections, allowing you to add dynamic variations to the performance. Five Sections (A–D, MUSICAL CLIMAX) are available. A Style or Groove can be played at any tempo you desire—fast or slow—and the tempo can be changed precisely. 1 Press the [TEMPO/TAP] button to call up the Tempo value in the display.
Style and Groove Settings Adjusting the Volume of the Style or Groove You can adjust the volume balance between Style or Groove playback and your keyboard performance. 1 3 Rotate the dial to set the Split Point between 036 (C1) and 096 (C6) (on the PSR-E463) or 028 (E0) and 103 (G6) (on the PSR-EW410). Split Point ... default value: 054 (F#2) Press the [FUNCTION] button. 036 (C1) 2 Use the CATEGORY [<<] and [>>] but- tons to call up “StyleVol” (Function 001) or “GroovVol” (Function 003).
Style and Groove Settings Chord Types for Style Playback For users who are new to chords, this chart features common chords. Since there are many useful chords and many different ways to use them musically, refer to commercially available chord books for further details. indicates the root note.
Song Settings Background Music Playback Random Song Playback With the default setting, pressing the [DEMO] button will play back only a few of the internal Songs repeatedly. This setting can be changed so that, for example, all internal Songs are played, or all Songs transferred to the instrument from a computer are played back, letting you use the instrument as a background music source. Six playback group settings are provided for your listening pleasure.
Song Settings Tempo Setting of the Song This operation is same as that of the Style and Groove. Refer to page 61. NOTE • Tempo of audio Song cannot be changed. Melody Voice Setting of the Preset Song You can change the Melody Voice of the current Preset Song and Song from the external device temporarily to any other desired Voice. 1 Press the [SONG] button, select the Tap Start This operation is same as that of the Style and Groove. Refer to page 61.
The Functions The “Functions” provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and Effects. Find the desired item in the Function List on pages 66–69, and then follow the instructions below. Basic Procedure in the Function Display 1 Press the [FUNCTION] button. this is the MIDI Initial Send function (Function 055), which is an operation and not a parameter.
The Functions Function Number PSRE463 Function PSREW410 Display Range/Settings Default Value Description Main Voice (page 20) 011 011 Volume M.Volume 000–127 * 012 012 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice. 000 (left)– 064 (center)– 127 (right) * Determines the stereo pan position of the Main Voice. A value of “0” results in the sound being panned full left, while a value of “127” results in the sound being panned full right.
The Functions Function Number PSRE463 PSREW410 Function Display Range/Settings Default Value Description Effects 036 036 Reverb Type Reverb 01–13 ** Refer to page 50. 037 037 Chorus Type Chorus 1–6 ** Refer to page 50. 038 038 Master EQ Type MasterEQ 1 (Speaker), 2 (Headphone), 3 (Boost), 4 (Piano), 5 (Bright), 6 (Mild) 1 (Speaker) Refer to page 52.
The Functions Function Number Display Range/Settings Default Value Description Style Out StyleOut ON/OFF OFF Determines whether MIDI messages generated via Style playback are transmitted (ON) or not (OFF) from the [USB TO HOST] terminal. 054 Song Out SongOut ON/OFF OFF Determines whether MIDI messages generated via Song playback are transmitted (ON) or not (OFF) from the [USB TO HOST] terminal.
USB Flash Drive Operations By connecting a USB flash drive (sold separately) to the [USB TO DEVICE] terminal, you can save the data created on this instrument, such as User Song and parameter settings. The saved data can be recalled to this instrument again for future use. IMPORTANT • You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable enough to last through these crucial operations.
USB Flash Drive Operations File Control Display List Display NOTE • Before using a USB flash drive, be sure to read “Precautions when using the [USB TO DEVICE] terminal” on page 70. • Messages may appear on the display during File Control procedures to aid in operation. Refer to the Message List on page 77 for details. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal, and wait until “USB” appears on the left corner of the display.
USB Flash Drive Operations Formatting a USB Flash Drive The Format operation lets you prepare commercially available USB flash drives for use with this instrument. NOTICE • The format operation overwrites any previously existing data. Make sure that the USB flash drive you are formatting does not contain important data. 1 Hold the [FUNCTION] button for longer than a second to call up the File Control display. 2 Use the CATEGORY [<<] and [>>] but- tons to call up the “Format?” message.
USB Flash Drive Operations 5 Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Save operation. After a while, a message indicating completion of the operation appears, and a User file (.usr) will be saved in a “USER FILES” folder which will automatically be created on the USB flash drive. NOTICE • The Save operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash drive during the operation. Doing so may result in data loss.
USB Flash Drive Operations 5 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Loading User Data from a USB Flash Drive Overwriting existing files A User data (page 72) saved as a User file (.usr) to the USB flash drive can be loaded to this instrument. If a file that already contains data is selected, an overwrite confirmation message will appear.
USB Flash Drive Operations from the File Control display. the display. If desired, rotate the dial to select a different Style file. DiscoFox 7 Confirm that the data has been properly loaded by calling up the User Song, one of the Styles 236–245, and/or the Registration Memory settings. Loading a Style File Style data created on another instrument or a computer can be loaded to the Style numbers 236–245, and you can play them in the same way as the internal preset Styles.
USB Flash Drive Operations Deleting a User File in the USB Flash Drive Deleting an SMF File in the USB Flash Drive User Files (.usr) in the root directory of the USB flash drive can be deleted. You can delete a SMF file that has been saved in the USB flash drive via the Save SMF operation (page 73). IMPORTANT • Only User files (.usr) saved in the “USER FILES” folder on the USB flash drive can be deleted. Files outside this folder cannot be recognized.
USB Flash Drive Operations Message List Message Comment To exit from the File Control display, press the [FUNCTION], [VOICE], [STYLE], [SONG] or [GROOVE CREATOR] button. You can also exit from the File Control function mode as follows: Can’tUse Indicates that the file control function is currently unavailable since the USB flash drive is being accessed. Complet. Indicates completion of the corresponding operation, such as data saving or transmission.
Troubleshooting Appendix Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When the instrument is turned on, power is turned off suddenly and unexpectedly. This is normal. If an AC adaptor other than the one specified is used, power may be turned off suddenly and unexpectedly.
Specifications PSR-E463 PSR-EW410 Product Name Digital Keyboard Dimensions (W x D x H) Size/Weight Weight Keyboard Voices Other Controllers Panel Tone Generation Polyphony (max.
Specifications PSR-E463 Storage Internal Memory External Drives Storage and Connectivity Connectivity Sound System Amplifiers Speakers Power Supply Batteries AC Adaptor Power Consumption Auto Power Off Included Accessories PSR-EW410 Approx. 1.
Index G A-B Repeat ..............................29 AC adaptor .............................. 14 Accessories ............................. 10 ACMP ......................................26 Arpeggio ............................22, 56 Arpeggio Quantize...................56 Arpeggio Type .........................23 Arpeggio Velocity.....................23 Attack.......................................57 Audio Device ...........................46 Audio Loop Back .....................69 Auto Accompaniment........
OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta.
LIMITED 1-YEAR WARRANTY ON PORTABLE KEYBOARDS (NP, PSRE, PSREW, PSRF, EZ, DGX230, DGX530, YPG AND YPT SERIES) Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every Yamaha product.
MEMO
MEMO
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. FRANCE NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.com/ Manual Development Group © 2017 Yamaha Corporation Published 12/2017 POES*.
