G DVD AUDIO/VIDEO SA-CD PLAYER LECTEUR DE DVD AUDIO/VIDEO SA-CD DVD-S2700 AUDIO DIRECT POWER HDMI STANDBY ON ON OFF
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T. 3 Refit the fuse cover. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION AVERTISSEMENT L’utilisation de commandes et l’emploi de réglages ou de méthodes autres que ceux décrits ci-dessous, peuvent entraîner une exposition à un rayonnement dangereux. SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING. VORSICHT Die Verwendung von Bedienelementen oder die Einstellung bzw.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 iii To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5 cm (1 inch) of free space all around this unit for adequate ventilation.
English CONTENTS INTRODUCTION 3 Playable disc formats.................................... DVD region codes ............................................... Patent information ......................................... Cleaning discs ............................................... Supplied accessories .................................... FUNCTIONAL OVERVIEW 5 Front panel ..................................................... Front panel display........................................ Rear panel ..........
Contents SETUP MENU 24 Menu overview ............................................. 24 Setup menu operation................................. 25 General setup menu .................................... 26 Selecting DVD-Audio mode.............................. 26 Selecting SA-CD mode...................................... 26 Setting the OSD language.................................. 26 Restricting playback with parental control ........ 26 Changing the parental password ........................
INTRODUCTION Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. • Illustrations in this manual are based on the U.K. and Europe models unless otherwise specified. • Notes contain important information about safety and operating instructions. • y indicates a tip for your operation. • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc.
INTRODUCTION Patent information – Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
FUNCTIONAL OVERVIEW English FUNCTIONAL OVERVIEW Front panel 1 2 AUDIO DIRECT POWER HDMI STANDBY ON ON 3 4 OFF 5 6 7 8 9 0 q w e 1 Disc tray Load a disc in the disc tray. 7 Front panel display Displays playback information or settings. 2 AUDIO DIRECT indicator Lights up when you select the AUDIO DIRECT mode by pressing AUDIO DIRECT on the remote control. 8 3 STANDBY/ON Turns on this unit or sets it to the standby mode.
FUNCTIONAL OVERVIEW Front panel display 1 2 SVCD WMA P.SCAN TITLE GROUP CHP/ TRK MP3 JPEG DVD AUDIO SA-CD DivX 3 4 D 6 5 2 MULTI D.MIX PROG. RANDOM ALL A B 7 1 P.SCAN indicator Lights up when the progressive scan function is activated. 5 D.MIX indicator (DVD-Audio only) Lights up when playing the disc that allows down mixing of the multi-channel audio source. 2 Playback mode indicators Display the icon for the selected playback mode. 6 Disc indicators Display the icon for the disc type.
FUNCTIONAL OVERVIEW 1 2 3 CENTER L L R R MIXED 2CH 4 5 6 COAXIAL IN OPTICAL OUT English Rear panel 7 RS-232C ON SURROUND SUBWOOFER FRONT AUDIO OUT VIDEO DIGITAL REMOTE CONTROL PR / CR AV HDMI 8 9 0 S VIDEO OFF PB / CB MAINS Y COMPONENT VIDEO OUT q (U.K. and Europe models) w 1 AUDIO OUT (6ch discrete) jacks Connect to the 6ch input jacks of your AV receiver. 7 MAINS Connect the supplied power cable.
FUNCTIONAL OVERVIEW 1 LIGHT Lights up the remote control buttons. Remote control POWER LIGHT 1 2 3 4 5 DIMMER HDMI AUDIO DIRECT STANDBY GROUP MULTI 2CH PAGE PROG RANDOM 6 REPEAT 7 8 A B CLEAR ENTER SETUP SLOW SEARCH STOP 9 0 q PLAY a s d f g h j TOP MENU e ON SCREEN RETURN 4 GROUP Selects the DVD-Audio group. 5 PAGE (+/–) Selects the DVD-Audio still picture. k l 7 CLEAR Clear the mode or setting. ENTER MENU 3 HDMI Switches the HDMI mode on or off.
FUNCTIONAL OVERVIEW ENTER Confirms the menu selection. r MENU Accesses the menu of a disc. t SUBTITLE Selects the subtitle language. y AUDIO Selects the audio language or format. u POWER ( l ) Turns on this unit. i STANDBY ( ) Sets this unit to the standby mode. o AUDIO DIRECT Switches the video output on or off during playback. This function is not available for HDMI output. During the playback in the AUDIO DIRECT mode, the front panel display goes out.
CONNECTIONS CONNECTIONS General notes on connections Be sure to turn off this unit and unplug the power supply cable, before you make or change connections. • Depending on the component you want to connect, there are various ways to make connections. Possible connections are described below. • Refer to the manuals supplied with your other components as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system.
CONNECTIONS If you want to use the Dolby Digital, DTS or MPEG function on your AV receiver, connect HDMI or DIGITAL (COAXIAL) or DIGITAL (OPTICAL) jack of this unit to the corresponding input jacks of your AV receiver using a commercially available HDMI, digital coaxial or digital optical cable. See “HDMI jack ” on page 12 about HDMI connection. This unit (U.K.
CONNECTIONS ■ HDMI jack HDMI (High-Definition Multimedia Interface) provides high quality digital audio and video on a single connection. Connect HDMI jack of this unit to the HDMI input jack of your AV receiver, and then to that of your TV using a commercially available HDMI cable. If your receiver does not have HDMI output jack, you can achieve a better video image by connecting HDMI jack of this unit directly to the HDMI input jack of your TV.
GETTING STARTED Step 1: Inserting batteries into the remote control 3 2 1 1 Press the part and slide the battery compartment cover off. 2 Insert the two supplied batteries (AAA, R03, UM-4), following the indications (+/–) on the inside of the compartment. 3 Slide the cover back until it snaps into place. Notes • Insert batteries correctly according to the polarity markings (+/–). The batteries inserted in the opposite direction may leak.
GETTING STARTED 3 Press Step 3: Setting a TV type This unit is compatible with both NTSC and PAL video formats. Select the color system that matches your TV. Notes • Before changing the current TV Standard setting, ensure that your TV supports the selected TV type system. • If you play an NTSC-formatted disc with the [PAL] setting or a PAL-formatted disc with the [NTSC] setting, the video quality may deteriorate.
GETTING STARTED Setting the audio, subtitle and disc menu languages You can select your own preferred language settings. This unit will automatically switch to your preferred language for you whenever you load a disc. If the language selected is not available on the disc, the default language of the disc will be used instead. The OSD (On-Screen Display) language in the system menu will remain once selected. 1 Press SETUP. ➜ The setup menu appears.
DISC OPERATION DISC OPERATION 3 Press Notes • Unless otherwise specified, all operations described here are carried out using the supplied remote control. • If the inhibition icon ( or “Prohibit”) appears on the TV screen when you press a button, the function for that button is not available on the current disc or at the current time. • Depending on the DVD or Video CD disc, some operations may operate differently or be restricted.
DISC OPERATION 1 Press SLOW / SEARCH (22 / 33). • For slow search, press PAUSE ( 8 ) to pause playback before pressing SLOW / SEARCH (22 / 33). 2 While searching, press SLOW/SEARCH (22 / 33) repeatedly to select the desired speed. 3 To resume normal playback, press PLAY ( 3 ).
DISC OPERATION Program playback (CD) Note You can customize the playback order for tracks stored in the disc. This unit supports a maximum of 20 programmed tracks. GROUP MULTI 2CH PAGE PROG PROG RANDOM Numeric buttons (0-9) A B CLEAR Disc menu operation (DVD/VCD/SVCD) Many DVD and Video CD (version 2.0 only) discs include original navigational menus called “DVD menus” and “Video CD playback control menus”. These menus provide a convenient way to operate the disc.
DISC OPERATION Using the OSD menu (DVD/VCD/SVCD/CD) 1 Press MENU to turn on the PBC function. English Using the Video CD playback control (PBC) menu (VCD/SVCD) During playback, press ON SCREEN. ➜ The disc menu appears on the TV screen. • Depending on the disc, the disc menu may appear once you load the disc. ➜ A list of available disc information appears on the TV screen. DVD-Video 2 Use SKIP (l22 / 33l) or the numeric buttons (0-9) to select a playback option.
DISC OPERATION ■ To select a title (DVD-Video)/group (DVD-Audio) 1 Press / / / repeatedly to highlight 1, and then enter a title/group number using the numeric buttons (0-9). 2 Press ENTER. repeatedly to highlight 2, and then enter a chapter or track number using the numeric buttons (0-9). / / / 2 Press ENTER. ■ To search for a time 1 Press repeatedly to highlight 5, and then enter hours, minutes and seconds from left to right using the numeric buttons (0-9).
DISC OPERATION If the disc contains sequences recorded from different camera angles, you can view the picture from a number of different angles. DivX external subtitle files The font sets listed below are available for DivX external subtitle files. To watch DivX discs with the desired font set, set the default subtitle language setting in the setup menu to the desired language (see “Setting the audio, subtitle and disc menu languages” on page 15).
DISC OPERATION Group/File selection (DVD-Audio/ DivX/MP3/WMA/Kodak picture CD) You can select a track in a specific group for DVD-Audio discs and a track/file in a folder for data disc. GROUP Bonus group playback (DVD-Audio) Some DVD-Audio discs contain bonus groups that require a four-digit password to gain access. In this case, refer to the disc jacket and other packaging for information.
DISC OPERATION Media Player MULTI 2CH PAGE Time 00 : 00 : 10 English GROUP MULTI /2CH PROG ROOT RANDOM SCRNE JPEG REPEAT A B CLEAR ENTER SETUP 0 1 JPG C_0729 5 2 3 4 SLOW SEARCH STOP STOP ( .. JPG A_0510 JPG B_0618 JPG B_0630 JPG C_0731 PLAY PAUSE Move : ) Select : Enter 2 Press / to select a folder, and then press ENTER to open the folder. 1 Press STOP ( 7 ) to stop playback. • 2 Press MULTI / 2CH. ➜ MULTI indicator lights up when the multi-channel area is selected.
SETUP MENU SETUP MENU Menu overview Main Menu GENERAL AUDIO SPEAKER Menu item DVD-Audio, DVD-Video SA-CD mode SA-CD, CD OSD Language English, Deutsch, Français, Español, Italiano, Русский _ _ _ _ (Enter your password) Level 1 to Level 8 Parental Password _ _ _ _ (Enter your password) New Password, Confirm Password Screen Saver On, Off Auto Power Off Mode 1, Mode 2, Off Sleep Timer Off, 30 min, 60 min, 90 min,120 min,150 min Factory Default _ _ _ _ (Enter your password) Yes, No DivX Re
SETUP MENU 2 Press Setup is carried out on the TV screen, enabling you to customize this unit to suit your own particular requirements. Follow the procedures below to start the setup menu operations. ➜ Menu items and setting items appear. SPEAKER 1/1 Size Distance Level REPEAT SA-CD Config CLEAR Config 1 CUT-OFF Frequency A B 100 ENTER SETUP SLOW SEARCH SETUP STOP PLAY PAUSE Move : Return Select : Enter SKIP TOP MENU / / / ENTER 3 Press / to highlight the desired menu item.
SETUP MENU General setup menu Setting the OSD language SETUP GENERAL AUDIO 1/2 DVD-Audio mode SA-CD mode Restricting playback with parental control OSD Language SPEAKER VIDEO Parental Rating Parental Password Screen Saver HDMI DISC Move : This menu contains various options for the on-screen display (OSD) language. For details, see “Setting the OSD (On-Screen Display) language” on page 15.
SETUP MENU Resetting the system You can turn on or off the screen saver. You can reset all options and your personal settings to the initial factory settings, except [Parental Rating] and [Parental Password]. • Select [Screen Saver] in [GENERAL] menu. On Select this to turn on the screen saver when disc playback is stopped for more than 15 minutes. 1 Select [Factory Default] in [GENERAL] menu. 2 Enter your four-digit password using the numeric buttons (0-9).
SETUP MENU Audio setup menu Setting the LPCM output Digital Out Set the LPCM output if you have connected this unit to a PCM-compatible receiver via a digital terminal, such as the coaxial or optical terminals. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. LPCM Output • SETUP GENERAL AUDIO SPEAKER 1/1 Analog Output 48KHz Select this to play back discs recorded at the sampling rate of 48 kHz.
SETUP MENU 1 Select [Initialize] under [Size] in [SPEAKER] SETUP GENERAL AUDIO 2 Press . Size ➜ The confirmation screen appears. Distance Level SPEAKER VIDEO menu. 1/1 3 Select [Yes] to reset the setting, and then press SA-CD Config ENTER. CUT-OFF Frequency ➜ [Size] settings are reset to the initial factory settings. HDMI DISC Move : Return Select : Enter Setting speaker distances You can set the sizes for individual speakers. You can set the distances for individual speakers.
SETUP MENU Surround L/R Set the distance from your listening position to the surround speakers. We recommend to place the surround left speaker and right speaker at the same distance from the listening position. Control range: 1ft to 40ft (0.3m to 12.0m) Control step: 1ft (0.3m) 3 For [Auto], press ENTER to output the test tone. For [Manual], press / to select each speaker, and then press ENTER to output the test tone. Initialize You can reset [Level] settings to the initial factory settings.
SETUP MENU When the aspect ratio of your TV is 4:3: Setting SETUP TV display 1/1 GENERAL 16:9 TV Display Black Level*1 SPEAKER *2 4:3 Pan Scan TV Type AUDIO VIDEO Playback disc English Video setup menu Closed Caption*1 4:3 Still Mode Progressive Scan HDMI DISC Scart Video Out*2 16:9 Picture Setting Move : Return 4:3 Letter Box Select : Enter *1: [Black Level] and [Closed Caption] are only for U.S.A. and Canada models. *2: [Scart Video Out] is only for U.K. and Europe models.
SETUP MENU Selecting the closed caption (U.S.A. and Canada models only) Selecting the progressive scan function Closed captions are data hidden in the video signals of specific discs, and are invisible without the use of a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. Subtitles rarely show all of the audio. For example, captions show sound effects (e.g.
SETUP MENU Select this setting to toggle the video signal output from the AV terminal between CVBS (composite video) and RGB. • Select [Scart Video Out] in [VIDEO] menu. CVBS Select this to output composite video signals. RGB Select this to output RGB video signals. Adjusting picture settings This unit comes with 10 sets of picture color settings that you can define yourself. • Select [Picture Setting] in [VIDEO] menu. Brightness Set this to adjust the overall brightness of the image.
SETUP MENU • Select [HDMI Video] in [HDMI] menu. 480P/576P Select this for 480/576 progressive-scan video. 720P Select this for 720 progressive-scan video. 1080I Select this for 1080 interlace video. Selecting the wide screen format Set the aspect ratio of the projected images on the screen. This function is only available for progressive scan and HDMI output. • Select [Wide Screen Format] in [HDMI] menu. 1080P Select this for 1080 progressive-scan video.
SETUP MENU Selecting an angle mark display Set the HDMI audio output to match the connected component. This function is only available when this unit is connected to an HDMI-compatible component via the HDMI jack. For details about the relationship between the audio format and the setting, see “HDMI Audio output table” on page 41. You can switch an angle mark display on or off when sequences recorded from different camera angles are played back. • Select [HDMI Audio] in [HDMI] menu.
LANGUAGE CODE LIST LANGUAGE CODE LIST Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amharic 1123 Galician 1722 Malay 2329 Spanish 1529 Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931 Armenian 1835 German 1415 Maltese 2330 Swahili 2933 Assamese 1129 Greek 1522 Maori 2319
TROUBLESHOOTING Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center.
TROUBLESHOOTING Problem No sound or distorted sound Solution See page Adjust the volume. – Check that the speakers are connected properly. – Adjust the volume level in the setup menu. 30 Check the digital connections. 11 If you are playing a DTS source, check that your receiver can decode DTS and [Digital Out] is set to [All]. 28 If you are playing an MPEG-2 source, check that your receiver can decode MPEG-2. Otherwise, make sure that [Digital Out] is set to [PCM].
GLOSSARY English GLOSSARY ■ Aspect ratio ■ Dolby Digital Horizontal and vertical ratio of a displayed image. The horizontal vs. vertical ratio of conventional TV is 4:3, and that of wide-screens is 16:9. Digital surround sound system which is developed by Dolby Laboratories provides completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides five full-range audio channels.
GLOSSARY ■ Interlace ■ Region code The most common type of scanning used in televisions. It divides a screen into even and odd numbered fields for scanning, and then builds an image by combining them into one image (frame). Many DVD discs include a region code so that the copyright owner can control DVD software distribution only to regions where they are ready to distribute. There are six regions codes, which restrict a DVD player to playing a DVD disc with the same region code.
GLOSSARY Analog output setting Audio format Dolby Digital DVD-Video DTS MPEG PCM 2ch*4 DVD-Audio CD/MP3/ WMA/DivX DTS-CD VCD SVCD SA-CD Multi Multi channel Stereo Multi channel Stereo Multi channel Stereo HDMI Audio Auto*1 Dolby Digital DTS MPEG PCM PCM 2ch PCM multi*2 PCM 2ch PCM multi*2 PCM 2ch Multi channel/Stereo PCM 2ch PCM 2ch Multi channel PCM (PPCM) multi*2,3 PCM (PPCM) multi*2,3 Stereo PCM (PPCM) 2ch*3 PCM (PPCM) 2ch*3 2ch*4 Multi channel/Stereo PCM (PPCM) 2ch PCM (P
SPECIFICATIONS SPECIFICATIONS PLAYBACK SYSTEM TV STANDARD • • • • • • • • • • Number of lines........................................PAL: 625, NTSC: 525 • Vertical frequency............................. PAL: 50 Hz, NTSC: 60Hz • Playback..........................................Multistandard (PAL/NTSC) DVD-Video DVD-Audio DVD-R, DVD-RW DVD+R, DVD+RW, DVD+R DL Video CD, SVCD SA-CD multi-channel and SA-CD stereo CD PICTURE CD CD-R, CD-RW VIDEO PERFORMANCE • Video (CVBS) output ...........................
