UAB Contents Supplied items ...................................................................... 2 Front Surround System Features ................................................................................ 3 Frequently asked questions ................................................ 3 Part names and functions .................................................... 4 Installation ............................................................................ 5 Owner’s Manual Connections ...............
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Supplied items Preparing the remote control Peel off the protection sheet before use. Make sure you have received all of the following items. Sound bar Operating range of the remote control Remain within the operating range shown below. When attaching the sound bar to a wall, operate with the remote control sensor on the top panel (p.5). Remote control Battery x 2 (AAA, R03, UM4) Optical cable (1.5 m [4.
Features Frequently asked questions Enjoy powerful and realistic sound from the sound bar with built-in subwoofer, and easy installation and connection to a TV and other devices. The following section covers popular functions and frequently asked questions about the sound bar. Q1 Can I operate the sound bar using the remote control of the TV? Switching between the remote controls of the TV and sound bar is inconvenient. A1 Yes.
Part names and functions Sound bar (front panel/top panel) Sound bar (rear panel/bottom panel) * * * * ANALOG SUBWOOFER OUT * Keys are located in the rear part of the sound bar. * * Bottom panel A Indicators Indicate the status of the sound bar. Refer to “Operations” (p.8 to 9) for the main functions of the indicators. B (input) key Selects an input source to be played back (p.8). C (mute) key Mutes the audio output. Press the key again to unmute (p.9).
Installation The orientation of the sound bar and the appropriate remote control sensor depend on the installation location. Installing the sound bar on a TV cabinet, etc. Attaching the sound bar to a wall 1 Slide the installation position selector switch on the bottom panel of the sound bar to the W (for Wall mount) side. The sound quality appropriate to the installation will be set. 2 Following “How to install on the wall” below, install the sound bar so that the keys face upwards.
Connections Connect to a TV (or other peripheral device). Sound bar (rear) CAUTIONS • Do not connect the power cable of the sound bar to the AC wall outlet before making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal. Power cable To AC wall outlet 1 Connect the TV and sound bar with the optical cable (supplied). TV Remove the cap of the optical cable and check the direction of the plug.
Digital connection of an external device You can connect an external device that has a coaxial digital audio output, such as a DVD player, to the BD/DVD input jack of the sound bar. Analog connection of an external device (game console) You can connect an external device, such as a game console or TV that does not have a digital audio output, to the ANALOG input jack of the sound bar. ANALOG BD/DVD Coaxial digital cable (commercially available) 3.
Operations 1 Input keys Indicators The indicators on the top panel flash or light up, to indicate the operation and setting status. ★: Keys that require pressing for more than 3 seconds LEARN, BLUETOOTH STANDBY, AUDIO DELAY Remote control signal transmitter Select an input source to be played back. TV ....................TV audio BD/DVD ...........Audio from a device connected to the BD/DVD input jack ANALOG .........Audio from a device connected to the ANALOG input jack BLUETOOTH .....................
4 (power) key Turns on or off (standby) the sound bar. Turned on BASS EXTENSION key 6 Enables/disables the bass extension function. When this function is enabled, you can enjoy a powerful bass sound with the Yamaha original bass boost technology “Advanced Bass Extension Processing.” 7 MUTE key Mutes the audio output. Press the key again to unmute. Indicator of the selected input source lights up (green) Bluetooth standby (p.
Listening to the sound from a Bluetooth device You can play back wirelessly from Bluetooth devices, such as a smartphone or digital music player. See also the operating manual of the Bluetooth device for more details. Pairing a Bluetooth device with the sound bar When connecting to a Bluetooth device for the first time, “pairing” between the device and sound bar is required. “Pairing” is necessary for each Bluetooth device you use.
Playing back audio from a Bluetooth device on the sound bar 1 With the sound bar turned on, press the BLUETOOTH key on the sound bar’s remote control to select Bluetooth as the input source. The BLUETOOTH indicator on the top panel flashes. Using the Bluetooth standby mode The Bluetooth standby mode allows you to turn on (or off) the sound bar automatically, linked with the operation of the Bluetooth device.
Settings NOTE • Steps 5 to 8 require only the TV’s remote control and the keys on the rear panel of the sound bar. The remote control of the sound bar is not necessary. • If the sound bar has already learned functions, the following indicators light up.
6 Teach the sound bar the “Volume (–)” code of the TV’s remote control. 6-1 Press (volume -) on the rear panel of the sound bar. 6-2 While pointing your TV’s remote control at the remote control sensor, hold down the volume (–) key for more than 1 second twice or three times. Result Bleep/buzzer Successfully learned Once Failed to learn * Repeat from Step 6-1. Twice 7 7-1 Indicators Lights up Flash Teach the sound bar the “Volume (+)” code of the TV’s remote control.
Clearing all programmed functions 1 With the sound bar turned off, hold down the LEARN key on the sound bar’s remote control for more than 3 seconds (for entering the learning mode). Using an external subwoofer The sound bar has dual built-in subwoofers; however you can connect an external subwoofer when you want to enhance low frequency sound. Connect a subwoofer to the SUBWOOFER OUT jack of the sound bar. Sound is output from both the built-in subwoofers and external subwoofer.
Setting the auto power standby function By enabling the auto power standby function, you can avoid forgetting to turn off the sound bar after use, or if you fall asleep while watching TV. NOTE • When the auto power standby function is enabled and one of the following conditions is met, the sound bar will automatically turn off. − No operations for 8 hours − No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source.
Troubleshooting Refer to the table below when the sound bar does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the sound bar, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: A The power cables of the sound bar, TV and playback devices (such as BD players) are connected to AC wall outlets securely.
Audio Remote control Problem Cause Remedy Problem Cause Remedy No sound. Another input source is selected. Select an appropriate input source (p.8). The sound bar cannot be controlled using the remote control. The sound bar is out of the operating range. Use the remote control within the operating range (p.2). No sound is coming from the subwoofer. The volume decreases when the sound bar is turned on. No surround effect. Noise is heard. The mute function is activated.
The power of the sound bar and of the TV switch in the opposite direction. (For example, the TV is turned off if the sound bar is turned on.) (when TV’s remote control learning function is used) The power of the TV was on when you performed the learning operation. Press the power key on the TV and (power) on the rear panel of the sound bar to turn them on and then press the power key on the TV’s remote control to turn them off.
Specifications Item Amplifier Section Front L/R Section Tweeter Section Subwoofer Section Decoder Input Jacks Output Jack specifications Maximum Rated Output Power Front L/R 30 W x 2 ch Type Acoustic suspension type Driver 5.5 cm (2-1/8") cone non-magnetic shielding type x2 Frequency Response 160Hz to 22kHz Bluetooth Subwoofer 60 W Bluetooth version Ver. 2.
This system is equipped with Yamaha’s AIR SURROUND XTREME virtual sound technology that achieves superior positional, high-grade 7.1 channel surround sound using the sound bar. Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
AVEEA11102A Important Notice: Guarantee Information for customers in EEA* and Switzerland English For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. * EEA: European Economic Area http://europe.yamaha.