01_Cov1_UAB.
CONTENTS PRECAUTIONS 6 5 Connecting the power cord.................................... 26 Connecting the power cord................................................................................................. 26 NOTICE AND INFORMATION 10 PLAYBACK BEFORE USING THE UNIT 14 Basic operations............................................................ 27 Features......................................................................... 14 Enjoying your favorite sound...............................
CONFIGURATIONS 37 Configuring various functions..................................... 37 Changing the brightness of the indicators (DIMMER)................................................ 37 Configuring the HDMI control function.......................................................................... 37 Configuring HDMI audio output........................................................................................ 38 Setting the auto power standby function.............................................
Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC/IC NOTICE (U.S.A. and Canada) FCC INFORMATION (U.S.A.) • This equipment compiles with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
PRECAUTIONS PLEASE READ CAREFULLY BEFORE USE. BE SURE TO FOLLOW THESE INSTRUCTIONS. WARNING The precautions listed below are to prevent risk of harm to the user and others, as well as to prevent property damage, and to help the user use this unit properly and safely. Be sure to follow these instructions. This content indicates “risk of serious injury or death.” If you notice any abnormality After reading this manual, be sure to keep it in a safe place where it can be referenced at any time.
▪ Be sure to use the supplied power cord. Also, do not use the supplied power cord for other units. Failure to observe the above may cause a fire, burns, or malfunctions. ▪ Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Failure to observe this may cause a fire or electric shocks. ▪ When setting up the unit, make sure that the AC outlet you are using is easily accessible.
▪ When disconnecting the power plug, always hold the plug itself and not the cord. Pulling by the cord can damage it and cause electric shocks or a fire. ▪ Insert the power plug firmly all the way into the AC outlet. Using the unit when it is not plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns. ▪ Do not disassemble a battery. If the contents of the battery get on your hands or in your eyes, it can cause blindness or chemical burns.
Hearing loss ▪ Keep batteries away from children. A child could accidentally swallow a battery. Failure to observe this may also cause inflammation due to battery fluid leaks. ▪ Do not put in a pocket or bag, carry, or store batteries together with pieces of metal. The battery could short, burst, or leak, causing a fire or injury. ▪ Always make sure all batteries are inserted in conformity with the +/polarity markings. Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.
NOTICE AND INFORMATION Notice Indicates points that you must observe in order to prevent product failure, damage or malfunction and data loss. Connections • If connecting external units, be sure to thoroughly read the manual for each unit and connect them in accordance with the instructions. Failure to properly handle a unit in accordance with the instructions could cause malfunctions. Power supply • If not using the unit for a long period of time, be sure to pull the power plug from the outlet.
Maintenance and care About disposal • When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or thinner, cleaning agents, or chemical scrubbing cloths can cause discoloration or deformation. • Be sure to discard used batteries in accordance with local regulations.
Information Indicates notes on instructions, restrictions on functions, and additional information that may be helpful. For DTS patents, see http://patents.dts.com. About the name plate of the unit Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS Digital Surround, and DTS Virtual:X are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. The model number, serial number, power requirements, etc.
About content in this manual • This manual is for the following readers: – the users of the unit – the constructor, builder and dealer that mount the unit on the wall • This manual uses the following signal words for the important information: – WARNING This content indicates “risk of serious injury or death.” – CAUTION This content indicates “risk of injury.
BEFORE USING THE UNIT Features Introduction This front surround system with its built-in subwoofers allows for the enjoyment of dynamic sound with video played on a TV. Playback device (BD/DVD player) Bluetooth device (Smart speaker) TV The unit • Play audio from a TV or BD/DVD player in surround sound. • Play audio from a Bluetooth device with excellent quality.
Compressed Music Enhancer technology improves sound quality and characteristics, and can be used to enjoy realistic and impressive sound. For details, see the following: 3D surround playback Surround sound can be heard not only from horizontal directions, but also from varying heights when DTS Virtual:X is used. For details, see the following: • “Connecting the unit to two Bluetooth devices simultaneously (multipoint connection)” (p.33) • “Playback with 3D surround sound” (p.
Accessories Using the remote control Checking the accessories Preparing the remote control Make sure you have received all of the following accessories. Remove the battery’s insulating strip before attempting to use the remote control. The unit Remote control * A CR2025 Lithium battery has already been inserted into the remote control. Power cord Optical digital audio cable Battery’s insulating strip Mounting template * Use when mounting the unit on awall.
Operating range of the remote control Replacing the battery in the remote control Operate the remote control within the range shown in the following figure. Press and hold the release tab firmly in the direction indicated by [A], and slowly slide the battery holder out in the direction indicated by [B]. Within 6 m (20 ft) Remote control sensor Battery holder Release tab NOTE When the unit is mounted on a wall, point the remote control at the remote control sensor on the top panel.
Part names and functions Part names and functions of the front/top panel The part names and functions of the front and top panels are as follows. a f b g 1 Indicators The indicators on the top panel flash or glow, to show the operation and setting status. In this manual, indicators status, such as off, glowing, and flashing, are shown as the illustrations below.
8 Remote control sensors Receive infrared signals from the remote control of the unit (p.17). NOTE ▪ 2, 3, 4 and 5 are touch sensors. Touch icons with your finger to control functions. ▪ Do not place any objects on the touch panel as doing so may result in unintended operations. ▪ When touch panel control is disabled, no operations can be performed using the unit’s touch panel. This prevents accidental operation of the unit.
Part names and functions of the rear panel The part names and functions of the rear panel are as follows. The illustrations in this manual include labels next to the jacks on the bottom of the unit for easy identification. c d e Inside the cover f a 1 AC IN jack Connect the power cord of this unit (p.26). 2 UPDATE ONLY jack Use to update this unit’s firmware. The jack is located inside the cover. Refer to the instructions supplied with the firmware for details.
Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. 1 z (power) button 5 INFO button Indicate audio signal information of the input source being played or bass extension setting (p.35). Turn on/off the unit. Turned on a 6 BLUETOOTH STANDBY button b c i d j e f k l The indicator for the last input source selected glows. Turned off (Bluetooth standby function enabled)（p.39） m Adjust the volume of the subwoofer (p.27).
PREPARATION 1 Installation Installing the unit on a TV stand, etc. NOTICE ▪ Do not stack the unit and a BD/DVD player or other device directly on each other. Doing so may cause a malfunction due to vibrations. Position the unit with the touch panel facing up on a TV stand, etc. ▪ Avoid touching, and never place any weight or pressure on the speakers (portion covered with fabric) on the top of the unit. Doing so may damage the speakers. ▪ The unit contains non-magnetic shielding speakers.
2 Connecting a TV Connecting a TV that supports Audio Return Channel (ARC) What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
Connecting a TV that does not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (sold separately) and an optical digital audio cable (supplied). HDMI OUT jack HDMI input jack HDMI HDMI HDMI OPTICAL The unit (rear) O TV jack TV O Audio output jack (digital optical) NOTE ▪ Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is recommended to prevent degradation of signal quality.
3 Connecting playback devices HDMI connection with a playback device Analog connection with a playback device Connect a playback device such as a BD/DVD player to the unit with an HDMI cable (sold separately). Use the HDMI cable to best connect a playback device equipped with the HDMI output jack. HDMI IN jack Connect a playback device, such as a game console or a TV that does not have an optical digital audio output, to the unit via a 3.5 mm stereo mini plug cable (sold separately).
4 Connecting an external subwoofer 5 Connecting the power cord Connecting the power cord Connecting an external subwoofer After all connections are complete, connect the supplied power cord to the AC IN jack on the unit and plug the power cord into an AC wall outlet. The unit has dual built-in subwoofers; however you can connect a subwoofer equipped with built-in amplifier when you want to enhance low frequency sound. Connect an external subwoofer to the unit via an RCA mono cable (sold separately).
PLAYBACK Basic operations Basic procedure for playback 3 Basic procedure for playing back music is as follows. Use the input buttons to select an input source to be played back. HDMI: Sound from a device connected to the HDMI IN jack TV: TV audio z ANALOG: Sound from a device connected to the ANALOG input jack Input buttons BLUETOOTH: Sound from a Bluetooth device The indicator for the selected input source glows.
5 6 Press VOLUME (+/-) to adjust the volume. Adjust sound settings to suit individual preferences. NOTE Volume down (-) ▪ For details on adjusting sound settings, see the following: Volume up (+) – “Playback with 3D surround sound” (p.29) – “Playback with surround sound” (p.29) When audio is output from both TV speaker and the unit, mute the TV sound. – “Playback with 2-channel stereo sound” (p.29) – “Playback of human voices clearly (clear voice)” (p.
Enjoying your favorite sound Playback with 3D surround sound Playback with surround sound Press 3D SURROUND to switch to 3D surround playback according to the input source or your individual preference. Press SURROUND to switch to surround playback according to the input source or your individual preference. When 3D surround playback is selected, DTS Virtual:X makes it possible to hear sound not only from horizontal directions, but also from varying heights. The SURROUND indicator glows white.
Playback of human voices clearly (clear voice) Enjoying enhanced bass sound (bass extension) Press CLEAR VOICE to turn on the clear voice function. Human voices such as lines in movies and TV shows, or news and sport commentary, are played clearly. Press BASS EXTENSION to turn on the bass extension function. You can enjoy enhanced bass sound and more powerful sound. Press the button again to disable the function. Press the button again to disable the function.
Use of a Bluetooth® device Listening to music stored on a Bluetooth® device 1 Press BLUETOOTH to select “Bluetooth” as the input source. The BLUETOOTH indicator on the unit flashes. Music files stored on a Bluetooth device, such as a smartphone, smart speaker, or digital music player, can be played back on the unit over a wireless connection. The unit can be connected to two Bluetooth devices simultaneously (Music cannot be played from both devices simultaneously).
3 4 Select “YAS-108 Yamaha” (or “YamahaAV”) in the list. Play back a song on the Bluetooth device. The unit will begin playing audio from the Bluetooth device. If a passkey (PIN) is required, enter the number “0000”. PIN 0 0 0 0 YAS-108 Yamaha 1 4 7 2 5 8 0 3 6 9 When the connection between the Bluetooth device and the unit is established, a completion message is displayed on the Bluetooth device, and the BLUETOOTH indicator on the unit glows.
Connecting the unit to two Bluetooth devices simultaneously (multipoint connection) The unit can be connected to two Bluetooth devices at the same time. Follow these instructions to switch between the Bluetooth devices for playback. 1 2 Stop playback on the Bluetooth device from which audio is currently being played. Start playback on the other Bluetooth device. The unit will begin playing audio from the other Bluetooth device.
Useful features for playback Using a TV’s remote control to operate the unit (HDMI control) 1 Turn on/off Both the TV and the unit turn on/off at the same time. 2 Switch input sources The HDMI control function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. The unit's input source switches accordingly when the TV’s input source is switched.
Showing audio information with playback 1 HDMI glows (red): DTS The type of audio signal being played, whether Dolby Pro Logic II is enabled or disabled, and bass extension and clear voice settings can be confirmed by the status of indicators. 1 Show the type of audio signal. HDMI glows (white): Dolby Digital TV glows (white): AAC HDMI and TV off: PCM/analog input/no input 2 Press INFO on the remote control. Show whether Dolby Pro Logic II is enabled or disabled.
Operating the unit with the HOME THEATER CONTROLLER app When the free HOME THEATER CONTROLLER app is installed on a mobile device such as a smartphone, the unit can be operated using the mobile device. In addition to basic unit operation, various functions, including surround mode selection and tone adjustment, can be more precisely configured using the app than is possible using the remote control. For details on the HOME THEATER CONTROLLER app, see the product information on the Yamaha website.
CONFIGURATIONS Configuring various functions Changing the brightness of the indicators (DIMMER) 2 Press and hold HDMI at least three seconds. The HDMI control function is enabled or disabled, and the unit turns on. The indicator shows HDMI control function status for several seconds immediately after the unit is turned on. Change the brightness of the indicators on the unit. Each time DIMMER is pressed, the brightness of the indicators changes as follows. Dim (default setting) → Off → Bright → Dim → ...
Configuring HDMI audio output Setting the auto power standby function Select the device from which audio input via the unit’s HDMI IN jack will be played when the HDMI control function is disabled. HDMI audio is output from this unit by default. Enabling the auto power standby function prevents the unit from remaining on when not in use. When the auto power standby function is enabled, the unit automatically turns off in any of the following situations.
Enabling/disabling touch panel control (child lock function) Configuring the Bluetooth standby function Disable touch panel control to prevent children from accidentally operating the unit. When touch panel control is disabled, operations can be performed only via the remote control or dedicated free “HOME THEATER CONTROLLER” app. This function is enabled by default.
Initializing the unit Reset the settings of the unit to the factory presets. 1 2 Turn off the unit. Touch and hold | and z on the unit until all indicators flash.
APPENDIX When any problem appears (General) When any problem appears (Power and system function) First in trouble, check the following: The power turns off suddenly Refer to the following when the unit does not function properly. • The power cord of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. • The unit, TV and playback devices (such as BD/DVD players) are turned on. • The connectors of each cable are securely inserted into jacks on each device.
The power cannot be turned on The unit does not function correctly l The protection circuitry has been activated three times consecutively. (If you try to turn on the power in this condition, the HDMI indicator will flash red.) To protect the product, the power cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.
The unit cannot be operated using the TV’s remote control When the unit is turned off, video and/or audio from a playback device are not output to the TV l The HDMI control function is incorrect. Confirm the settings are properly configured as follows. – The HDMI control function of the unit is enabled. – The HDMI control function is enabled on the TV. – Set audio output to any option other than TV.
l The HDMI control function is disabled. When connecting a TV that supports ARC (Audio Return Channel) to the unit using an HDMI cable only, enable the HDMI control function. To output audio signals from the unit with the HDMI control function disabled, connect the TV’s audio output jack to the unit’s TV input jack (optical digital) via the optical digital audio cable. For details, see the following: – “Configuring the HDMI control function” (p.
Noise is heard The volume decreases when the unit is turned on l The unit is too close to another digital or high-frequency device. Move those devices away from the unit. l The automatic volume adjustment function is activated. To prevent excessive loudness, the unit automatically controls its volume within a certain level when the unit is turned on. Turn up the volume as required. For details, see the following: – “Basic procedure for playback” (p.27) No surround effect l Stereo playback is selected.
l The unit is already connected to another Bluetooth device. (Using a Bluetooth device that has never been connected to the unit.) Terminate the current Bluetooth connection, and then connect to the new device. When any problem appears (Bluetooth®) The unit cannot be connected to a Bluetooth® device l The unit is already connected to two Bluetooth devices. (Using a Bluetooth device that has been connected to the unit.) Terminate one of the Bluetooth connections, and then connect to the new device.
l A device emitting electromagnetic waves (such as a microwave oven, a wireless device and so on) may be located nearby. Do not use the unit near devices that emit electromagnetic waves. l Audio from another Bluetooth device is playing. Stop playback on the Bluetooth device from which audio is currently being played, and start playback on the other Bluetooth device.
Specifications Decoder Specifications Supported audio signal The specifications of the unit are as follows. DTS Digital Surround (up to 5.1ch) Amplifier Section Input Jacks Maximum Rated Output Power • Front L/R • Subwoofer 30 W × 2ch HDMI 60 W Digital (Optical) Speaker Section Analog (3.
Bluetooth class Range (line-of-sight) Supported content protection method Bluetooth Class2 Dimensions (W x H x D) Approx. 10 m (33 ft) SCMS-T • Maximum Output Power (EIRP) 2402 MHz to 2480 MHz • [Europe, Central and South America and Asia models] AC 110 to 240 V, 50/60 Hz AC 230 V, 50 Hz • [Taiwan model] AC 110 V, 60 Hz • [China model] AC 220 V, 50 Hz • [Korea model] AC 220 V, 60 Hz 3.2 kg (7.1 lbs) Supported HDMI audio and video formats AC 120 V, 60 Hz AC 240 V, 50/60 Hz • [U.K.
• High Dynamic Range (HDR) video – HDR10 – HLG The following digital audio formats can be used by the unit. The unit is compatible with the following resolutions. Optical Supported digital audio formats • VGA Audio signal types • 480i/60 Hz Audio signal formats • 480p/60 Hz 2ch Linear PCM 2ch, 32 kHz to 96 kHz, 16/20/24 bit • 576i/50 Hz Bitstream Dolby Digital, DTS • 576p/50 Hz Compatible media CD, DVD-Video, DVD Audio, etc. DVD-Video, etc.
Information for qualified contractors or dealers Mounting the unit on a wall CAUTION ▪ To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard). Mount the unit on a wall so that the touch panel faces forward. ▪ Make sure you use screws (sold separately) that can support the weight of the installation. Using clamps other than specified screws, such as short screws, nails, and two-sided tape, may cause the unit to fall.
2 4 Remove the mounting template from the wall, and then install screws (sold separately) at the points marked on the wall. Hang the unit on the screws. 457 mm (18") Mounting holes on the bottom of the unit 4 to 5 mm (#8 to #10) 7 to 9 mm (1/4" to 3/8") 13 to 15 mm (1/2" to 5/8") 3 20 mm (3/4") or more Touch panel Peel off the backing paper from the spacers (supplied) and attach the adhesive face to the bottom of the unit.
05_Cov4_UAB.fm 44 ページ ２０１８年３月１６日 金曜日 午後４時２２分 AVEEA11102A Important Notice: Guarantee Information for customers in EEA* and Switzerland English For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. * EEA: European Economic Area http://europe.yamaha.com/warranty/ Yamaha Global Site http://www.
