User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
PREPARATION
1 Installation
Installing the unit
Install the unit as shown in the following illustration.
Install the subwoofer externally of the center unit. To prevent sound
from reflecting off of walls, angle the subwoofer slightly toward the
center of the room.
Touch panel
n NOTICE
• Do not stack the center unit and any other device directly on each other. Doing so
may cause a malfunction due to vibrations.
• Do not apply excessive force to the unit when moving it. Doing so may damage the
speakers or the portion covered with fabric.
• Avoid the following when installing the subwoofer to prevent any loss in sound
volume.
– Installing the subwoofer so that the speaker (portion covered with fabric) is too
close to a wall.
– Covering the subwoofer’s bass reflex port.
• The subwoofer can only be used in its upright position. Do not position the
subwoofer on its side.
• The unit contains non-magnetic shielding speakers. Do not place magnetically
sensitive items (hard disk drive, etc.) near the unit.
• Do not place objects such as metallic furniture between the center unit and the
subwoofer as such objects may interfere with wireless communication.
n NOTE
The center unit can also be mounted on a wall. For details, see the following:
• “Mounting the center unit on a wall”(p.59)
En
17