User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
3
Use the input buttons to directly select an input
source to be played.
HDMI: Sound from a device connected to the HDMI IN jack
TV: TV audio
BLUETOOTH: Sound from a Bluetooth device
NET: Audio from streaming services
The indicator for the selected input source glows.
Glows
When TV is selected
Example
TV
4
Start playback on the external device selected in step
3.
5
Press VOLUME (+/-) to adjust the volume.
The number of glowing indicators (other than the Alexa
indicator) increases or decreases as volume is raised or
lowered.
Volume down (-)
Volume up (+)
When audio is output from both TV speaker and the unit,
mute the TV sound.
6
Adjust sound settings to suit individual preferences.
n NOTE
• If the * indicator on the subwoofer does not glow properly the first time the unit is
turned on, pair the center unit and subwoofer manually. For details, see the following:
– “Pairing the center unit and subwoofer manually”(p.42)
• For details on adjusting sound settings, see the following:
– “Playback with 3D surround sound/surround sound”(p.28)
– “Playback with 2-channel stereo sound”(p.28)
– “Playback of human voices clearly (Clear Voice)”(p.29)
– “Enjoying enhanced bass sound (Bass Extension)”(p.29)
En
24