User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
• For details on playing music files stored on a Bluetooth device, see the following:
– “Listening to audio from a Bluetooth® device”(p.30)
• For details on playing audio from streaming services, see the following:
– “Streaming services”(p.34)
• To mute the sound, press |. Press | again or VOLUME (+/-) to unmute.
Flash (on mute)
• When sound input to the HDMI IN jack is output from the TV, the volume level does not
change even if you press VOLUME (+/-) or |.
• To adjust the subwoofer volume, press SUBWOOFER (+/-). The subwoofer volume can
be adjusted separately from the whole volume.
The indicator (other than the Alexa indicator) that glows changes as volume is raised or
lowered.
Volume down (-) Volume up (+)
• When playing audio/video from a device connected to the TV, select TV as the unit’s
input source, and select the playback device with the input selector on the TV.
Operating the unit using voice
commands (Amazon Alexa)
You can talk to Amazon Alexa on your unit. With Alexa, you can ask to
play music, hear the news, check weather, control smart home devices,
and more.
An Amazon account is required to use Amazon Alexa and the unit must
be connected to a network. Use the Sound Bar Controller app to enter
your Amazon account information and log into the service.
Alexa can perform the following operations with the proper voice
commands.
• Switching input sources
• Adjusting (muting) the volume
• Selecting and listening to streaming services
See the following website for details on the supported streaming
services:
https://manual.yamaha.com/av/sb/ss/sbc/
n NOTE
• As of February 2020, Amazon Alexa supports the following languages: English, German,
Italian, Spanish and French.
• Service is limited to certain areas.
• Services supported by the unit may not be available in some regions in which the unit
is sold.
• See the product information page on the Yamaha website for the latest information.
• A subscription may be required to listen to Amazon Music or Amazon Kindle on this
unit. For more information, visit the Amazon website.
• For information on other streaming services, visit the websites of those service
providers.
• A smart hub (sold separately) may be required to connect smart home devices that will
be controlled via the unit.
En
25