User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
Useful features for playback
Using a TV’s remote control to operate
the unit (HDMI control)
The HDMI control function coordinates TV and unit operation so that the
unit can be operated using the TV’s remote control.
When the unit is connected to a TV via HDMI cable, the TV’s remote
control can be used to perform the following operations.
a
b
c
d
TV's remote control (example)
a Turn on/off
Both the TV and the unit turn on/off at the same time.
b Switch input sources
The unit's input source switches accordingly when the TV’s input source is
switched.
For example, when a TV program is selected on the TV, the unit’s audio input
source is switched to the HDMI OUT (ARC) jack using the ARC function or TV
input jack.
When a BD/DVD player is connected to the HDMI IN jack on the unit, the
unit’s input source switches to HDMI when the BD/DVD player is selected
with the TV’s remote control.
c Switch the audio output device
The audio output device can be switched to the TV or this unit. Operations
may differ depending upon TVs.
d Adjust volume
The unit’s volume can be adjusted when the TV’s audio output is set to the
unit.
n NOTE
• If you are unable to operate the unit with your TV’s remote control, configure the HDMI
control function of your TV and the unit. For details, see the following:
– “Configuring the HDMI control function”(p.36)
• The input source can be switched while the unit is off (HDMI signal pass-through).
• The volume displays on the TV and unit may not be the same.
En
32