User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
Showing audio information and function
settings
The type of audio signal being played, as well as settings for functions
can be confirmed by the status of indicators.
1
Press INFO.
The indicators on the unit will show the following audio
information for three seconds immediately after INFO is
pressed.
INFO
a b c d e f g
a Show the type of audio signal.
STATUS glows (white): Dolby Digital
STATUS glows (red): DTS
STATUS and HDMI off: PCM/no input
b Show whether Dolby Pro Logic II is enabled or disabled.
Glows: Enabled
Off: Disabled
n NOTE
Dolby Pro Logic II is enabled automatically when 2-channel stereo signals are
played in surround sound.
c Show the bass extension function setting.
Glows: Enabled
Off: Disabled
d Show the Bluetooth function setting.
Glows: Enabled
Off: Disabled
n NOTE
The Bluetooth function setting is not shown while audio content is playing from a
Bluetooth device or over a network.
e Show the dynamic range compression setting
Glows (blue): Compression (maximum)
Glows (white): Compression (standard)
Off: No compression
f Show the wireless (Wi-Fi) function setting.
Glows: Enabled
Off: Disabled
g Show touch panel control setting
Glows: Enabled
Off: Disabled
En
33