User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
Enabling/disabling the network standby
function
Enabling the network standby function allows the unit to be turned on or
off using a mobile or Bluetooth device as follows.
This function is enabled by default.
• The unit can also be turned on and off using the Sound Bar Controller
app installed on your mobile device.
• When a Bluetooth device is connected to this unit while it is off, this
unit turns on and the input source switched to BLUETOOTH.
1
Turn off the unit.
2
Press SPORTS for at least five seconds.
The network standby function is enabled or disabled.
SPORTS
Once the indicator has shown the network standby function
setting applied to the unit as follows, the unit will turn on.
Glows (enabled)
Off (disabled)
n NOTE
The unit consumes more power when it is off with the network standby function enabled
than it does when it is off with this function disabled.
En
40