User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
l The unit is already connected to another Bluetooth device.
Terminate the current Bluetooth connection, and then connect to
the new device.
No sound can be heard or the sound cuts
off intermittently from a Bluetooth®
device
l The volume on the Bluetooth device may be too low.
Raise the volume on the Bluetooth device.
l Bluetooth is not selected as the input source.
Select Bluetooth as the input source. For details, see the following:
– “Listening to audio from a Bluetooth® device”(p.30)
l Playback on the Bluetooth device has not been performed.
Perform playback on the Bluetooth device.
l The sound output on the Bluetooth device may not be set to the
unit.
Select the unit as the output destination on the Bluetooth device.
l The connection to the Bluetooth device was terminated.
Connect with the Bluetooth device one more time.
l The unit may be too far away from the Bluetooth device.
Move the Bluetooth device near the unit.
l A device emitting electromagnetic waves (such as a microwave
oven, a wireless device, etc.) may be located nearby.
Do not use the unit near devices that emit electromagnetic waves.
When any problem occurs (Network
trouble)
The network feature does not function
l The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on the wireless router.
l The unit does not support IPv6 network.
Connect IPv4 network.
The unit cannot connect to the Internet
via a wireless router (access point)
l The wireless router (access point) is turned off.
Turn on the wireless router.
l The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each
other.
l There is an obstacle between the unit and the wireless router
(access point).
Move the unit and the wireless router (access point) in a location
where there are no obstacles between them.
l The wireless router (access point) is configured to use a specific
wireless channel.
Change wireless router settings so that a channel is selected
automatically. If a specific channel will be specified, specify channel
1 or 11.
En
52