Front Surround System Owner’s Manual • Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS INTRODUCTION 4 BEFORE USING THE UNIT 6 5 Connecting to a network.. .............................. 20 Network functions................................................................................................ 20 Wired network connections................................................................................. 21 Wireless network connections.. .......................................................................... 21 Connecting to a network with the Sound Bar Controller app.. .
Playing audio content using the Sound Bar Controller app.. ................................................. 34 When any problem occurs (Network trouble).. ....... 52 Specifications.................................................... 54 Streaming services.. ............................................................................................ 34 Center unit specifications....................................................................................
INTRODUCTION Information Indicates notes on instructions, restrictions on functions, and additional information that may be helpful. About functions included in the unit Amazon, Alexa, Amazon Music, Kindle and all related logos are trademarks of Amazon.com, Inc. or its affiliates. The services that can be used with this unit that are provided by third parties may be changed, suspended, or ended without notice. Please be aware that Yamaha Corporation does not bear any responsibility for these services.
• This manual uses the following signal words for the important information: – The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. WARNING This content indicates “risk of serious injury or death.” CAUTION This content indicates “risk of injury.
BEFORE USING THE UNIT Features Introduction This unit is a front surround system that allows for the enjoyment of superior sound quality from video played on a TV connected to the unit. n Play surround sound n Ask Alexa to control the unit Alexa, turn up the volume. Alexa, switch the input source to HDMI. Audio from a TV, media streaming service, or BD/ DVD player can be played with 3D surround sound/ surround sound. With Alexa built-in, you can operate this unit, access your music playlists.
n Easy operation using the smartphone app n Listen to audio from Bluetooth devices and streaming services Streaming services Bluetooth devices Sound Bar Controller Install the Sound Bar Controller app on either a smartphone or tablet. Various features and settings can be easily accessed and controlled via the app. Enjoy listening to audio from Bluetooth devices and streaming services* such as Amazon Music and Spotify. * A subscription may be required to listen to streaming services via this unit.
3D surround playback HDMI control function This unit supports virtual 3D surround sound technology called “DTS Virtual:X”. Surround sound can be heard not only from horizontal directions, but also from varying heights when this unit’s 3D surround mode is enabled, creating a virtual acoustic environment. This ultimately provides an immersive audio and sound experience by creating a sense of sounds not only coming from behind, but also above the listener.
Accessories Using the remote control Checking the accessories Preparing the remote control Make sure you have received all of the following accessories. Remove the battery insulating strip before attempting to use the remote control. The unit (YAS-CU209) In this manual, the unit may also be referred to as the “center unit”. Remote control A CR2025 Lithium battery has already been inserted into the remote control.
Press and hold ▽ on the rear cover of the remote control, slide the cover out in the direction indicated [1], and replace the old battery with a new one [2]. Slide the rear cover back into place in the direction indicated [3]. Replacing the battery in the remote control [1] WARNING • DO NOT SWALLOW THE BATTERY. • Keep new and used batteries away from children. • If the battery compartment does not close securely, stop using the product and keep it away from children.
Part names and functions Part names and functions of the front/top panel The part names and functions of the front and top panels are as follows. a b c d e f g h i h a Indicators The indicators on the top panel flash or glow to show the operation and setting status. In this manual, indicator status, such as off, glowing, and flashing, are shown as the illustrations below. Off Glows Flashes e } / { (volume +/-) b ) (Alexa) Manually wake Alexa to enable a voice command (p.25).
i Remote control sensor Receives infrared (IR) signals from the remote control of the unit (p.9). n NOTE • b, c, d, e and f are touch sensors. Touch icons with your finger to control functions. • Do not place any objects on the touch panel as doing so may result in unintended operations. • When touch panel control is disabled, no operations can be performed using the unit’s touch panel. This prevents accidental operation of the unit.
Part names and functions of the rear panel The part names and functions of the rear panel are as follows. d e f a b a Power connector Connect the power cord (p.20). b HDMI IN jack For connecting to an HDMI-compatible AV device, such as a BD/DVD player, a satellite and cable TV tuner, and a game console, and inputting video/audio signals (p.19). c f UPDATE ONLY jack c HDMI OUT (ARC) jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.18).
Part names and functions of the subwoofer The part names and functions of the subwoofer are as follows. Front panel Rear panel b a e a Bass reflex port b PAIRING button Use to pair the center unit with the subwoofer manually (p.42). c STANDBY indicator d * indicator Glows when the center unit and subwoofer are connected wirelessly. e Power connector Connect the power cord (p.20). Shows subwoofer’s status (p.15).
Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. g | (mute) button a @ (Alexa) button a z HDMI TV BLUETOOTH h NET Manually wake Alexa to enable a voice command (p.25). Mute the audio output (p.23). Press the button again to unmute or press VOLUME (+/-). h z (power) button b Input buttons b Select an input source to be played back. Turn on/off the unit. c • HDMI : Sound from a device connected to the HDMI IN jack (p.
i 3D SURROUND button Switch between 3D surround playback and surround playback each time the button is pressed (p.28). j STEREO button Switch to stereo (2-channel) playback (p.28). k VOLUME (+/-) button Adjust the volume of the unit (p.23). l INFO button Confirm the type of audio signal being played, as well as settings for functions (p.33).
PREPARATION 1 Installation Installing the unit n NOTICE • Do not stack the center unit and any other device directly on each other. Doing so may cause a malfunction due to vibrations. • Do not apply excessive force to the unit when moving it. Doing so may damage the speakers or the portion covered with fabric. • Avoid the following when installing the subwoofer to prevent any loss in sound volume. – Installing the subwoofer so that the speaker (portion covered with fabric) is too close to a wall.
2 Connecting a TV Connecting a TV that supports Audio Return Channel (ARC) n What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
Connecting a TV that does not support Audio Return Channel (ARC) 3 Connecting AV devices HDMI connection with an AV device Connect the TV to the unit with an HDMI cable (sold separately) and an optical digital audio cable (supplied). Connect an AV device such as a media streaming device to the unit with an HDMI cable (sold separately). HDMI OUT (ARC) jack HDMI IN jack HDMI input jack HDMI HDMI output jack HDMI HDMI HDMI HDMI HDMI Center unit (rear) OPTICAL O TV jack 1. Remove the cap.
4 Connecting to power 5 Connecting to a network Connecting to power Network functions Once all connections have been made, connect the unit to power as shown in the following illustration. A network connection allows you to play various streaming services via the unit, and to talk with Amazon Alexa to operate this unit, or to play music. The Sound Bar Controller app for mobile devices is required to configure and operate network functions.
Wired network connections Wireless network connections To use a wired network connection, connect the unit to a router via an STP ethernet cable (CAT-5 or higher straight cable). Connect the unit to a wireless router (access point) to use a network. See the following for instructions on connecting to a wireless router (access point). Internet • “Connecting to a network with the Sound Bar Controller app” (p.
Connecting to a network with the Sound Bar Controller app 2 Follow the app’s on-screen instructions to complete the settings. Install the Sound Bar Controller app on your mobile device to connect the unit to a network. n NOTE • Confirm that your mobile device is connected to your home router before beginning. • Screen displays are provided for reference purposes only. Actual screen displays may differ depending upon the mobile device used.
PLAYBACK Basic operations Basic procedure for playback 1 Basic procedure for playing back music is as follows. z z HDMI TV BLUETOOTH CLEAR VOICE HDMI TV BLUETOOTH The center unit and subwoofer are automatically connected via wireless connection. Once the connection has been successfully established, the * indicator on the subwoofer’s rear panel glows, and the unit is ready for playback.
3 5 Use the input buttons to directly select an input source to be played. Press VOLUME (+/-) to adjust the volume. The number of glowing indicators (other than the Alexa indicator) increases or decreases as volume is raised or lowered. HDMI: Sound from a device connected to the HDMI IN jack TV: TV audio BLUETOOTH: Sound from a Bluetooth device NET: Audio from streaming services Volume down (-) The indicator for the selected input source glows.
• For details on playing music files stored on a Bluetooth device, see the following: – “Listening to audio from a Bluetooth® device” (p.30) • For details on playing audio from streaming services, see the following: – “Streaming services” (p.34) • To mute the sound, press |. Press | again or VOLUME (+/-) to unmute. Operating the unit using voice commands (Amazon Alexa) You can talk to Amazon Alexa on your unit.
For example, just ask: n NOTE l Adjust the volume “Alexa, turn up the volume.” “Alexa, turn down the volume.” • Amazon Alexa is a service provided by Amazon. This service may change, be discontinued, or be terminated without notice. Please note that Yamaha Corporation is in no way responsible for the continuation of this service, and will not be held liable for any issues that arise from the use of this service. • This service is limited to certain areas.
n Alexa indicator Examples of Alexa indicator activity Status of Alexa The Alexa indicator on this unit glows depending on the status of Alexa, as follows. The microphones are disabled. Examples of Alexa indicator activity Status of Alexa Glows red Idle A system setting is changed. Goes off Glows orange Listening to a request An error occurred.
Enjoying your favorite sound Playback with 3D surround sound/ surround sound Selecting a surround mode The unit switches between 3D surround playback and surround playback each time 3D SURROUND is pressed. Select 3D surround playback or surround playback according to the input source or your individual preference. Select the surround mode best suited to the content by pressing MOVIE, TV, MUSIC, SPORTS, or GAME with 3D surround playback or surround playback enabled.
Playback of human voices clearly (Clear Voice) Enjoying enhanced bass sound (Bass Extension) Press CLEAR VOICE to turn on the clear voice function. Human voices such as dialogue in movies, TV shows, news, and sport commentary can be heard clearly. Press BASS EXT to turn on the bass extension function. You can enjoy enhanced bass sound and more powerful sound. Press the button again to disable the function. Press the button again to disable the function. The indicators will go off.
Using a Bluetooth® device Listening to audio from a Bluetooth® device 1 Press BLUETOOTH to select “Bluetooth” as the input source. The unit is ready for the Bluetooth connection, and the BLUETOOTH indicator on the unit flashes. Audio content from a Bluetooth device (such as a smartphone, tablet, laptop, or digital music player) can be played through this unit over a wireless connection.
3 4 Select this unit in the list. Play content with audio on the Bluetooth device. The unit’s name is displayed as shown in the following illustration. The unit will begin playing audio from the Bluetooth device. Yamaha YAS-209 n NOTE When the connection between the Bluetooth device and the unit is established, a completion message is displayed on the Bluetooth device, and the BLUETOOTH indicator on the unit glows. • To terminate the Bluetooth connection, perform one of the following operations.
Useful features for playback a Using a TV’s remote control to operate the unit (HDMI control) Turn on/off Both the TV and the unit turn on/off at the same time. b Switch input sources The HDMI control function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. The unit's input source switches accordingly when the TV’s input source is switched.
Showing audio information and function settings c The type of audio signal being played, as well as settings for functions can be confirmed by the status of indicators. d 1 Show the bass extension function setting. Glows: Enabled Off: Disabled Show the Bluetooth function setting. Glows: Enabled Off: Disabled Press INFO. n NOTE The Bluetooth function setting is not shown while audio content is playing from a Bluetooth device or over a network.
Playing audio content using the Sound Bar Controller app Streaming services Audio content distributed by various streaming services over the Internet can be played via the unit. Use the dedicated app for mobile devices provided by a particular streaming service or talk to Amazon Alexa to select content to play from a streaming service. See the product information page on the Yamaha website for information on services supported by the unit.
CONFIGURATIONS Configuring various functions Once the indicators have shown the brightness setting applied to the unit as follows, the unit will turn on. Changing the brightness of the indicators (Dimmer) • Dim (default setting) Change the brightness of the indicators on the center unit. The brightness is dim by default. 1 2 Turn off the unit. Glow • Off Press and hold MUSIC for at least five seconds. The brightness setting of the indicators is changed.
Configuring the HDMI control function 1 2 Enable or disable the unit’s HDMI control function (link function). This function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. Turn off the unit. Press and hold HDMI for at least five seconds. The HDMI control function is enabled or disabled. This function is enabled by default. HDMI Once the indicator has shown the HDMI control function setting applied to the unit as follows, the unit will turn on.
Configuring HDMI audio output 1 2 Select the device from which audio input via the unit’s HDMI IN jack will be played when the HDMI control function is disabled. HDMI audio is output from this unit by default. The unit (default) Play HDMI audio input signal from the unit. TV Play HDMI audio input signal from the TV. Turn off the unit. Press and hold 3D SURROUND for at least five seconds. The HDMI audio output setting is changed.
Setting the auto power standby function 1 2 Enabling the auto power standby function prevents the unit from remaining on when not in use. When the auto power standby function is enabled, the unit automatically turns off in any of the following situations. Turn off the unit. Touch and hold y and then touch and hold z on the unit for at least five seconds. The auto power standby function is enabled or disabled.
Enabling/disabling touch panel control (Child Lock function) 1 2 Disable touch panel control to prevent children from accidentally operating the unit. Touch panel control is enabled by default. Turn off the unit. Press and hold INFO for at least five seconds. The touch panel control is enabled or disabled. INFO Once the indicator has shown the touch panel control setting applied to the unit as follows, the unit will turn on.
Enabling/disabling the network standby function 1 2 Enabling the network standby function allows the unit to be turned on or off using a mobile or Bluetooth device as follows. This function is enabled by default. Turn off the unit. Press SPORTS for at least five seconds. The network standby function is enabled or disabled. • The unit can also be turned on and off using the Sound Bar Controller app installed on your mobile device.
Enabling/disabling the wireless (Wi-Fi) function Enabling/disabling the Bluetooth function Enable or disable the wireless (Wi-Fi) function. This function is enabled by default. Enable or disable the Bluetooth function. This function is enabled by default. 1 2 1 2 Turn off the unit. Press and hold NET for at least five seconds. Turn off the unit. Press and hold BLUETOOTH for at least five seconds. The wireless (Wi-Fi) function is enabled or disabled. The Bluetooth function is enabled or disabled.
Updating the unit’s firmware Pairing the center unit and subwoofer manually New firmware that provides additional features or product improvements will be released as needed. Firmware can be updated using the Sound Bar Controller app installed on a mobile device. The center unit and subwoofer are automatically connected via wireless connection the first time the unit is turned on.
3 Within 30 seconds, press and hold the PAIRING button on the rear panel of the subwoofer for at least five seconds. When the center unit and subwoofer have been paired successfully, the * indicator will glow. Selecting the HDMI signal format Problems such as a lack of sound or the appearance of abnormal colors in a video may occur when some AV devices are connected to the unit. Should this occur, changing the setting may resolve these issues. Mode 1 (default) Select this mode in most cases.
Initializing the unit Setting the dynamic range compression Reset the settings of the unit to the factory presets. Select the dynamic range compression level. 1 2 This function is set to “No compression” by default. Turn off the unit. 1 2 Touch and hold } and z on the unit until all indicators except the Alexa indicator flash. Turn off the unit. Use the remote control to select the desired compression level.
The indicators show the compression level applied for several seconds. Compression level Indicators Compression (maximum) Compression (standard) Glows (white) No compression Glow (white) n NOTE Press INFO to confirm the dynamic range compression level applied to the unit. For details, see the following: • “Showing audio information and function settings” (p.
APPENDIX When any problem occurs (General) When any problem occurs (Power and system function) Check the following first: The power turns off suddenly Refer to the following when the unit does not function properly. • The power cords of the unit (center unit and subwoofer), TV and AV devices are connected to AC wall outlets securely. • The unit (center unit and subwoofer), TV and AV devices are turned on. • The connectors of each cable are securely inserted into jacks on each device.
The power cannot be turned on The unit does not function correctly l The protection circuitry has been activated three times consecutively. To protect the product, the power cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center. l The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage.
l A communication error between the unit and connected device has occurred. A communication error may occur depending upon the generation of the device connected to the unit. See the following if such an error occurs: – “Selecting the HDMI signal format” (p.43) l The TV does not support HDCP version 2.2/2.3. Connect the unit to the HDMI input jack on an HDCP v2.2/2.3compliant TV when playing video content that requires an HDCP v2.2/2.3-compliant device. l The batteries are weak. Replace with new batteries.
l The TV does not support the unit’s functions. Even if your TV supports the HDMI control function, some functions may not be available. For details, see documentation supplied with your TV. l The mute function is activated. Cancel the mute function. For details, see the following: – “Basic procedure for playback” (p.23) l The volume is too low. Turn up the volume. For details, see the following: – “Basic procedure for playback” (p.23) Alexa will not operate the unit l Alexa is not properly configured.
l [When the * indicator on the subwoofer flashes.] or [When the STANDBY indicator on the subwoofer glows.] The center unit and subwoofer are not connected due to a bad wireless communication status. – Move the subwoofer closer to the center unit. – If the communication between the center unit and subwoofer is obstructed by a metallic object or another object, change the position of the center unit and subwoofer or change the installation location of the subwoofer.
The volume decreases when the unit is turned on Noise is heard l The automatic volume adjustment function is activated. To prevent excessive loudness, the unit automatically controls its volume within a certain level when the unit is turned on. Turn up the volume as required. For details, see the following: – “Basic procedure for playback” (p.23) No surround effect l The unit is too close to another digital or high-frequency device. Move those devices away from the unit.
l The unit is already connected to another Bluetooth device. Terminate the current Bluetooth connection, and then connect to the new device. When any problem occurs (Network trouble) No sound can be heard or the sound cuts off intermittently from a Bluetooth® device The network feature does not function l The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on the wireless router. l The volume on the Bluetooth device may be too low.
l The mobile device is not connected to the wireless router over a wireless connection. Connect the mobile device to the wireless router over a wireless connection. Wireless network is not found l Microwave ovens or other wireless devices might disturb the wireless communication. Turn off these devices or move them farther away from the unit and wireless router. l The unit is connected to a multiple SSID router. The router’s network splitter may be blocking access to the unit.
Specifications Input jacks Center unit specifications HDMI Center unit (YAS-CU209) specifications are as follows. Digital (optical) Amplifier section 50 W × 2ch HDMI Speaker section • Driver • Frequency response • Impedance Acoustic suspension type (non-magnetic shielding) 4.6 cm (1-3/4") cone × 4 • Frequency response • Impedance 4 Ω (8 Ω × 2) 1 (UPDATE ONLY) LAN 1 (NETWORK) Function Sink function (source device to this unit) Bluetooth version Ver 4.
General [U.K. and Europe models] • Radio frequency • Maximum output power (EIRP) 2402 MHz to 2480 MHz Power supply 8.8 dBm (7.6 mW) Network Ethernet standard Supported codecs 100BASE-TX/10BASE-T • [U.S.A. and Canada models] AC 100 to 120 V, 50/60 Hz • [Australia model] AC 100 to 240 V, 50/60 Hz • [U.K.
Weight General 2.7 kg (6 lbs) n NOTE Power supply The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. • [U.S.A. and Canada models] AC 100 to 120 V, 50/60 Hz • [Australia model] AC 100 to 240 V, 50/60 Hz Subwoofer specifications • [U.K.
Supported HDMI audio and video formats Copyright protection standard The following HDMI audio and video formats can be used by the unit. n NOTE Audio signals • Refer to documentation supplied with the AV device, and set the device appropriately. • When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices.
Supported digital audio formats The following digital audio formats can be used by the unit. Optical Audio signal types Audio signal formats 2ch Linear PCM 2ch, 32 kHz to 96 kHz, 16/20/24 bit Bitstream Dolby Digital, DTS HDMI (ARC) Audio signal types Audio signal formats 2ch Linear PCM 2ch, 32 kHz to 96 kHz, 16/20/24 bit Bitstream Dolby Digital, DTS n NOTE The contents of this manual apply to the latest specifications as of the publishing date.
Information for qualified contractors or dealers Mounting the center unit on a wall 1 Mount the center unit on a wall using the screw holes on the rear panel. Attach the mounting template (supplied) on a wall and mark for the screw holes. Mounting template (supplied) CAUTION • Please have a qualified contractor or dealer when mounting the center unit on a wall. Some skills and experience are required for safe installation.
3 Hang the center unit on the screws.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.