\ 1 2 Read these instructions. CAUTION RISKOFELECTRIC SHOCK DONOTOPEN 3 4 Heed all warnings. Follow all instructions. 5 6 Do not use this apparatus near water. Clean only with dry cloth. 7 Do not block arty ventilation openings. Install in accordance with the manufacturer's instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
.i_l'..[o]:llf__hVll_'f__ylT:l|*lhVk'.*il;lll_Jl[o],v_ FCC INFORMATION 1 IMPORTANT UNIT! NOTIUE: DO NOT MODIFY THIS (for US customers) Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this This product, when installed as indicated in the instructions contained in this manual, meets FCC product is lound to be the source of interference, which can be determined by turning the unit "OFF' and "ON". requirements.
1 To assure the finest performance, please read this manual carelully. Keep it in a sale place for future relerence. 2 Install this smmd system in a well ventilated, cool. dry, clean place away from direct sunlight, heat sources, vibration. dust. moisture, aud/or culd. Allow veutilatiun space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors. or transformers tu avoid humming sounds.
Getting started ............................................................ Supplied parts ................................................................ Conlrols and functions ................................................... 2 2 3 Placing this system ...................................................... Placing the center system ............................................... Connection ...................................................................
Tiffs product consists of the following parts. Before making connections, make sure you received all of the following parts. • Units Center • system (YAS-70CU) Subwoofer/system (YAS-70SPX) x 1 control x 1 Accessories System control cable (4m)x 1 Spacer Speaker cable (4m)x2 x 2 Remote Battery x 2 (AAA, R03, UM4) jjJ _ Double-sided tape (Large, 2 pieces) x 2 / The form of the supplied accessories varies depending on the models.
• Front panel of the center system Front panel display _)YAMAHA f I r m m VOLUME +/- INPUT 3 En
• Front panel display of the center system DSP indicators AUTO/TUNED/STEREO/MEMORY indicator CINEMA DSP indicator AUTO indicator Show; that this system is in the automatic tuning mode. fr_.
• Remote control _ii _iii_T? INPUT1 INPUT2 _,_ii_!i INPUT3 ii Infrared signal transmitter Adjust Selects TEST L the Speaker balance.
le_;h°r.tlp'_ • Using the remote control /_a. = Use the remote control within 6 m (20 feet) of the center system Within 6 rn (20 feet) and point it toward the remote control sensor. • Be carelM not to spill liquid on the remote controh • Be careful not to drop the rmuote control.
To enjoy quality sounds thoroughly, correctly. Alter deciding the layout, you need to place this system in their appropriate follow the procedure below to install this system. Subwoofer/system control (YAS-70SPX) Center system (YAS-70CU) Center system positions and install them (YAS-70CU) Place the center systmn above a TV or beneath tile TV so that tile center systenl and your TV aligned vertically.
II I__._ i_roi h'h.-l.-l,l.1|q i i • Attaching the center system to a wall You can attach the center (9132" or more)). system to a wall using COmlnercially available screws (#8, Diameter: 7.5 inn] OFmore When installing the center system on a wall, all installation work must be performed by a qualified contractor or dealer personnel. The customer must never attempt to perform this installation work.
• Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug, Doing so may damage the cable plug and/or terminal, Follow the procedure below to connect the center system and the subwoofer/system control. Connecting speaker cables Connect the cable plug to the speaker jack of the same color, Connect the cable plug to the speaker jack of the same color.
The subwoofer/system connecting cables. • control your external has 3 digital/analog components, input jacks (optical digital x 1, coaxial check the outpnt .jacks of the components Digital connection • The digital jacks ol Ihis systenl support PCM, Dolby Digital, and DTS signal syslem. • The digital .jacks support digital signals of which sampling lrequency is 96 kHz or less.
'_'tlff|_if|'ti • Analog connection [INPUT 3] ANALOG jacks Example1 : TV TV Example 2: VCR or video camera VCR or video camera, etc. with no digital output. VCR etc.
[[¶'/f ffiYlflql This system YDS-10, is equipped control. Connect dedicated cable.
Once you have finished procedure 1 all cable connections below to start basic playback Press STANDBY/ON. This system turns on and tile power standby mode, press STANDBY/ON (see pages 9 to 12) and remote control preparation (page 6), t_llow the operation. indicator lights up. To set this system to the again. This system has the auto-sleep hmction which automatically switches to the standby mode if you do not operate this system for about 24 hours while this system is turned on.
The sound program on your listening The sound features preference, field programs allow you to enjoy various and not purely reproduce realistic kinds of audio such as movie or music. Choose a progrmn based on the name of the program. sounds with the multi speaker channels. _.,#._ This system automatically memorizes the settings assigned to each input source. When you select another input, this system automaticNly recalls the last settings %r the selected input.
._|l The Dolby Pro Logic II modes reproduce 5.1 -channel audio from stereo e_t_IIl_.ll[ol#,t.'t_.'lel#lJlm_l':2}'_t#l_l. sounds. Press DEC. MODE repeatedly to select the desired Dolby Pro Logic II mode. DEC. MODE "PL II" appears ill tile front panel display. Lights up Each time you press the button, the mode changes as follows. Fq.,.. i i hci:iii.:i.c r" _.,...i..i.v ,...,'...'.i.,:::' _:i: i[ M"Yi Decoder mode descriptions PL II Movie Dolby Pro Logic II processing for movie sources.
You can use two tuning modes to tune into the desired FM station: Frequency tuning mode you can search or specify the frequency of the desired FM station automatically or manually. ("Basic tuning operation" on page 17) Preset tuning mode You can preset the desired number.
Press FM to select this system to the FM tuner mode. "FM" appears in the front panel display. FM Press AUTO/MAN_L so that the AUTO indicator lights up in the front panel display. This system is set to tile automatic tuning mode. Lights up #i .................... H :L' :i'='_: ,..,L,: ,..,L,: ==L,I.., :r='_::La_,=. "-_, No colon (:) If a colon (:) appears, this system is set to the preset tuning mode and the frequency tuning is not possible.
• Automatic station preset First, scan tlre FM stations with strong signals and store them to tlre memory by using tire auton3atic preset station feature. You can store up to 40 FM stations (AI to ES: 8 preset station nmnbers in each of the 5 preset station groups). I Press FM to select this system to the FM tuner mode. "FM" appears in the front panel display. 2 Press and hold MEMORY seconds. for more than 3 Tire preset station aumber as well as the MEMORY and AUTO indicators flashes.
• Manual station preset Use this feature to preset your desired station manually. Tune into a station. See page 17 for tuning 2 iustructions. Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 10 seconds. Flashes M_OR, _"_ ==i2'i'd ,D ,D ,:_;_ i'd L.i..,=. Press A
You call ph/y back the audio sources Supported iPod (Click iPod nano stored on your iPod on this system. iPod and Wheel) iPod mini Battery charge feature This system charges the battery of the iPod stationed to the Yamaha of the subwoofer/system control while this system is turned on.
You can change the brightness of the front panel display. Press DIMMER repeatedly. Each time you press DIMMER, the brightness of the front panel changes. DIMMER --1 [) :[[v[["[[!!!:[:;i: [:::iFF' Bright Di:HHER " i [:,i:HHER ' 2. Di:HHER ":5 i"= '[" h'H'='H:::'D .....d t,.." ,[, t t_ tt,.,,v,. You can turn offthe front panel display. This feature is useful when you enjoy Press After DISP MODE DISP. "DISPLAY this system Dark "] a movie in a dark listening room. MODE.
Ordinarily, the 5.1 channel center speaker, speaker two surround system speakers, needs two front speakers, This system employs the Air Surround technology that enables enjoy the surround sound with the front left and right speakers center system; without you can hear the center the corresponding a I Ordinal 5.1 channel speaker system I and a subwoofer. and surround channel you to in the sounds speakers. [ The sound image of this system ] ! This unit creates control.
Use this feature to adjust • Adjusting 1 the vohnne bahmce of each (virtual) the volume balance speaker and tile position of the virtual surround speakers. of each channel Press TEST to activate the speaker test mode. Following message appears in the front panel display and this system outputs the test tones. Active(virtual) speakerchannel Test tone is output Volume at each (virtual) balance speaker £ 1: Front left = (FL) ._= for about 2.5 seconds in the following order. I .....
• Adjusting This system employs the subwoofer/system listening room. the position of the virtual surround speakers the Yamaha Air Surround system that enables the surround sound field using the center system and control. This system creates the surround sounds by using the reflections on the walls of your Use this feature to achieve the ideal surround sound.
Use this feature to set the equalizer to optimize the tonal quality of the sound for the acoustic characteristics listening room. of your Press ROOM EQ repeatedly to select the desired room equalizer setting. ROOM You can also adjust the output EQ level of the virtual center, ["il::i{:?.[) If the walls in your listening room are hard and you can get the sufliciently reflected sounds '.
If there is any problem with this system, check the following items. If you cannot solve your proNem with the t_llowing remedies or if your problmn was not listed below, turn off and unplug this system, and then consult the nearest authorized Yamaha dealer or service center. Power turns on but immediately shuts off. The speakers make no sound, The power cable may be connecled improperly, Make sure Ihe power cable is plugged into the outlet firmly. The speaker cable may be shorled.
The remote control does not work for operating • this This system may be operaled outside remote control operation range, Ihe For information on the remote conlrol range, refer to "Remole conlrol'. 5 system. The lemole conlrol sensor of this systen/ may be exposed to direct sunlight of lighting. Change Ihe lighting. The batteries Replace may be worn ()tit. the batteries.
_-'_'_tlhdfeIa_:lmlJ)fel_li_8(fell • Air Surround Front surround Yamaha sound enables v,,hich is developed the surround with traditional sound front surronnd Surround system sound field. • • system enables by field. In comparison technologies, provides the Air a wide range of natural music on range and other characteristics. Ex. 5.
YAS-70CU FM Tuner • Type ........... Pull range acoustic suspension magnetic shickling type • Driver (Pull range) ........................ 5 cm (2") cone magnetic shielding type x 6 (L3, R3) • Frequency Response .............................................. 100 Hz to 25 kHz • Input impedance ............................................................................ 6 Q • Maximum Input ......................................................................... 35 W • Sensitivity (2.83 V, 1 m) ............
@YAMAHA © 2007 YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE B,A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE YAMAHA YAMAHA ELECTRONICS SCANDINAVIA YAMAHA MUSIC CEDEX02, (UK) LTD.