CAUTION RISKOF ELECTRICSHOCKDO NOTOPEN CAUTION: TO REDUCE THE RISK OF 1 Read these instructions. 2 Keep these 3 Heed all warnings. 4 Follow 5 Do not use this apparatus 6 7 Clean ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. instructions. all instructions. Do not block any ventilation openings. with the manufacturer's instructions.
FCC INFORMATION 1 IMPORTANT UNIT! NOTICE: This product, when instructions Yamaha installed contained requirements. DO NOT as indicated in this manual, Modifications may void your MODIFY granted Compliance interference in the meets not expressly authority, THIS product FCC shielded be used. follow When and/or cables. Follow approved by by the FCC, connecting another this product product could to use only high quality to in the USA.
1 2 To assure the finest carefully. Keep Install this sound place away performance, please system from dust, moisture, and/or sunlight, cold. Locate dry, clean (i.e. a room inside shock, fire, damage Avoid installing 18 Before Burning objects damage 6 Containers with liquid may cause this unit.
GETTING STARTED ................................................ Supplied parts ................................................................ Controls and functions ................................................... 2 LISTENING 2 3 Overview TO THIS SYSTEM ........................................ 8 Placing the center system ............................................... CONNECTION .........................................................
This product consists of the following items. Before making connections, make sure you received all of the following items. • Units Subwoofer/system control (YAS-71SPX) Center system (YAS-71CU) I • Accessories System control cable (4 m) Indoor FM antenna Speaker cable (4 m) (For US customers only) Spacer x 2 Double-sided tape (2 pieces) Non-skid pad (2 pieces) Screw x 6 _.
• Front panel of the center system m ( \ m m STANDBY/ON INPUT [o ol m m @ Front panel display @ STAN DBY/ON Shows information about the operational status of the system. (_' P. 4) Turns on the system, or sets it to standby mode. (_' P. 16) @ Remote control sensor Receives infrared signals from the remote control. (_' P. 5, 7) A small amount infrared @ Power indicator Lights up when the system is turned on. (_' P.
• Front panel display of the center system AUTO TUNED STEREO_MUTE @ @ Decoder indicators The respective indicator lights up when any of the decoders of the system is functioning. AUTO indicator @ DOCK indicator • Lights up when the system is receiving a signal from an iPod stationed in the Yamaha iPod universal dock (such as YDS-10 or YDS-I 1, sold separately) connected to the DOCK terminal of the subwoofer/system control. (_' P.
Remote control Input buttons Select an input source you want to listen to. (_' P. 16) Infrared signal transmitter STEREO • Turns extended stereo mode on and off alternately. (_' P. 21) • Turns off surround mode. (_' P. 18) Cursors (4 / I_ / • / V)/ENTER Position: Change the setting. (_' P. 19) Audio delay: Change the setting. (_' P. 31 ) iPod: Move the cursor. (_' P. 27) FM: Move a preset group and number forward or backward. (_' P. 22) PRESET/TUNE, AUTO/MAN'L, Control an FM tuner. (_' P.
@ POSITION Shifts the optimum listening area according to your listening position. (_' P. 19) TEST Outputs the test tone. (_' P. 20) @ ENHANCER Turns on and off compressed music enhancer mode alternately. (_' P. 21) @ NIGHT Turns night listening mode on or off. (_' @ AREA Selects the optimum listening area. (_' P. 32) P. 20) @ AUDIO DELAY Delays the output sound to synchronize it with the video image. (_' P. 31 ) @ @ 6 En @ DISP. MODE Changes the brightness of the front panel display. (_' P.
q_ttlt/IL'_f_Titt_J • Using the remote control Within (20') __ 6 rn Use the remote control within 6 m (20') of the center system and point it toward the remote control sensor. • Be careful not to spill liquid on the remote control. • Be careful not to drop the rernote control. • Do not leave the remote control ill a place that is: hot or hurnid, such as near a heater or ill a bathroorn extrernely cold dusty • Installing the batteries I Take off the battery compartment cover.
To enjoy quality sound correctly. Alter deciding thoroughly, you the layout, need follow to place Subwoofer/system system Center this the procedure system in the appropriate below to install this positions, and install the components system.
• Attaching the center system to a wall Installing the center system using the keyholes You can attach the center system to a wall using commercially available screws (#8, Diameter: 7.5 mm or more 5116" or more)). When installing the center system on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the center system to fall, resulting in personal injury.
Installing the center system using the screw holes You can also use the inner or outer screw holes on the rear of the center system for installing the center system using a commercially available bracket or rack. Bracket or rack, etc., Screw (M6) 77 mm52.5__[=m(3")mm [-_(2-1/16'')[550_ (lmm2901-7/16"j(21-518") (_mm _ [.
• Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal. Follow the procedure below to connect the center system and the subwoofer/system control. Connecting speaker cables Connect the cable plug to the speaker jack of the saule color. Connect the cable plug to the speaker jack of the same color.
I[._.li'li'laP_l[.ll The subwoofer/system control has 3 digital input jacks (optical digital x 2, coaxial digital x 1) and 1 analog input jack. Before connecting your external components, check the output jacks of the components and be sure to use correct connection cables. • Digital connection • The digital ,jacks of this system support PCM, Dolby Digital, and DTS bitstream. • The digital ,jacks support digital signals of 96 kHz sampling frequency o1"less.
,_oli'li'l=_qiNi[INPUT 3] COAXIAL jack CD player t \ I _;AxiAi) Coaxial digital cable JDIGITAL OUTPUT • Analog connection [INPUT 4] ANALOG jacks Example1 : TV TV Example 2: VCR or video camera VCR or video camera, etc., with no digital output. iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii VCR, etc.
The system is equipped with the DOCK terminal, which allows you to connect the Yamaha iPod universal dock (such as YDS-10 or YDS-I 1, sold separately) where you can dock your iPod. Connect the Yamaha iPod universal dock to the DOCK terminal of the subwoofer/system control using its dedicated cable. Refer to "Using iPod r_p' on page 27 for details.
"i'li'li'lgqiPll-- After you have made all connections, connect the power cable of the subwoofer/system control. To AC wall outlet x(_t.. You call attach the cover after you have made all conuections o1"detach according to your preference. Attach the cover to the rear panel of the subwoofer/system control using the 6 supplied screws as shown.
Once you have finished procedure all cable connections below to start basic playback (_' P. 11 to 15) and remote control preparation (_' P. 7), follow the operation. To turn off the volume temporarily, press MUTE. While the mute function is activated, the MUTE indicator flashes. To resume the volume, press MUTE again.
Ordinarily, two front speakers, a center speaker, two surround speakers, and a subwoofer are necessary for enjoying 5.1 channel surround sound. ITypical 5.1 channel speaker system I • Virtual 7.1 channel The AIR SURROUND XTREME technology, using only the front left and right speakers of the center system and subwoofer, enables you to enjoy a realistic 7.1 channel sound by simulating sound from virtual speakers at center, surround, and surround backs.
IF:fl:i.'lli:l:{.]l&_l_J;tt:l:l_l Press one of the surround mode buttons. Surround mode buttons The names of the selected input source and the selected surround mode appear in the front panel display. i Hb.'ii i 'i MOVIE O Surround Movie _ r,'iiiii Bi.. mode descriptions his mode is useful when you enjoy movie contents on media such as DVD, etc. Music MUSIC © SPORTS © This mode is useful when you listen to music contents on media such as DVD, etc.
:fl'tr_lll'i'[ellJ_l_J:ft'laiM I This function shifts the optimum listening area from side to side according to your listening position for the best Virtual Surround effect. 1 2 Press POSITION to enter position mode. The current position appears in the front panel display. Press
IF:fl:tf.']li:l:{.]lJ_l_J;ft:lah_l You can select the optimum listening area from two modes. Press AREA. AREA Each time you press AREA, NORMAL and WIDE modes change alternately. NORMAL Select this to sharpen the sound effect. "AREA NORMAL" appears in the front panel display when NORMAL mode is selected. WIDE Select this to widen the optimal listening area. • The default setting is NORMAL. • The setting is set for all the input sources.
:fl'R'.'_ll"i'[e11Nl_J:ft'l=i_rd An extended sound is achieved t_)r a 2 channel source STEREO I such as a CD player. Press STEREO to enter extended stereo mode. "EXTENDED" appears in the front panel display. E .................. :.;:':;i i:::. HL)k'. L:, Each time you press STEREO, the function is turned on (EXTENDED) and off (STEREO) alternately. --'4'-• The default setting is STEREO. • The system memorizes the settings assigned to each input source.
You can use two tuning modes to tune into the desired FM station: Frequency tuning mode You can search or specify the frequency of the desired FM station automatically or manually. (See "Basic tuning operation" on page 23.) Preset tuning mode You can preset the desired FM station in advance, and then recall the station by specifying the preset group and number. (See "Using station preset feature" on page 24.) A!E/A_ FM E Selects the preset group (A to E).
W_t_Vh_Eem_oI_LTJE:!.'foY,JDIo_,__ Manual tuning It the signal received from the station you want to select is weak, you can tune into the desired station by specifying the frequency manually. In FM tuning mode, press AUTO/MAN'L repeatedly so that the AUTO indicator disappears, and then press +/repeatedly to specify the frequency of the desired station. If you tune to a station using the manual tuning feature, the system receives the FM radio signals in monaural reception mode to increase signal quality.
• Automatic station preset You can store up to 40 FM stations (AI to ES: 8 preset numbers in each of the 5 preset groups). 1 2 Press FM to set the input to FM. "FM" appears in the front panel display. Press and hold MEMORY seconds. for more than 3 The preset group and number as well as the MEMORY and AUTO indicators flash. Alter approximately 5 seconds, automatic presetting starts from the current frequency and proceeds through higher frequencies.
!!_...tE_ltVitv[t..mgol._irjE,:!=.fol*_fDI_l'*_I,,...t_ • Manual station preset Use this feature to preset your desired station manually. 4 Tune into a station. See "Basic tuning operation" on page 23 for tuning instructions. 2 Press +/- to select a preset number (1 to 8) while the MEMORY indicator is flashing. Flashes Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 30 seconds. Press MEMORY again to cancel while the MEMORY indicator is flashing.
IW! _.'_i =l _Vh_[e]l _el _ i rjl : ! ="{eTzf BI ef'zT,.'_f< • Recalling the preset stations Press PRESET/TUNE mode. to select preset tuning Press A4 E or A_ E repeatedly to select the desired preset group (A to E). Press +/- repeatedly to select the desired preset number (1 to 8). !o!! _ !" !':'! _:::_ _::_.=:."_!'_!!°!:?..
Once you have stationed your iPod in the Yamaha iPod universal dock (such as YDS-101 YDS-1 1, sold separately) connected to the DOCK terminal of the subwoofer/system control (_' P. 14), you can enjoy playback of your iPod. Supported iPod (Click iPod nano iPod and Wheel) iPod mini Battery charge feature This system charges the battery of an iPod stationed in the Yamaha iPod universal dock connected to the DOCK terminal of the subwoofer/system control while this system is turned on.
• Controlling Docking remote your iPod in simple remote mode your iPod in the Yamaha mode. supplied You can perform remote control iPod universal dock (such as YDS-10 the basic operations or YDS-1 l, sold separately) of your iPod (play, stop, skip backward/forward, enters simple etc.) using the in this mode. Operations call be also done with the controls on your iPod. Refer to the instruction manuals of your iPod for its operations.
You can connect the Yamaha Bluetooth audio receiver (such as YBA-I 0, sold separately) to the DOCK terminal of the subwoofer/system control and enjoy the music contents stored in your Bluetooth component (such as a portable music player or computer equipped with a Bluetooth transmitter, etc.) without wiring between the system and the Bluetooth component. You need to perform "pairing" of the connected Yamaha Bluetooth audio receiver and your Bluetooth component in advance.
4 Press and hold BLUETOOTH ON for more than 3 seconds to start pairing. "Searching..." appears when the pairing starts. While the Yamaha Bluetooth audio receiver is in pairing mode, the DOCK indicator flashes in the front panel display. -4'-To cancel the pairing, press BI, UETOOTH OFF. S Check that the Bluetooth component detects the Yamaha Bluetooth audio receiver.
FPD TV images sometimes lag behind the sound. You can use this function to delay the sound output to synchronize it with the video image. d II _, Press AUDIO mode. DELAY to enter adjusting Press A/V to adjust the delay time. Options: 0 to 240 ms You can adjust the delay time by the 10 ms. ...........r,. r" i ="=E i L.' L. i..., r"I i 'i =''=¢' =.... ,L &, &,: !'! 2> Setting value Press AUDIO DELAY again or ENTER to exit adjusting mode. • The default setting front panel display.
Night effects. listening mode enables This function you to listen to dialog or vocals is useful when you enjoy movies more clearly or music at lower volume by suppressing louder sound at night. Press NIGHT. "NIGHT ON" appears in the front panel display. The NIGHT indicator lights up when Night listening mode is selected. d<_iiii:i:!i!i!i!i!i!!!i_i Lights up ii!ii i iiiiiiiiiiiiiiiiiiii!!ii Pi .LE:_M _ _ UPi NIGHT • To cancel night listening mode, press NIGHT again.
You can change the brightness a darker environment. of the front panel display. You can also turn off the front panel display Press DISP. MODE Each time you press to view a movie in repeatedly. DISP. MODE, the brightness of the front panel changes. DISP. MODE [) Ztq"!E]:;i:OFT: 4, Bright [) :[NNER ....:L 4, i) :[NNEF;.:: ..... 2 4, [:,][NNEF::..... :2; 4, [) :[NNEF,::...... :I. 4, Dark L.,.L'.:":.:; F'L A"? L.
If there is any problem with the system, check the following items. If you cannot solve a problem with the following remedies, or if the problem is not listed below, turn off and unplug the system, and then consult your nearest authorized Yamaha dealer or Service Center. Power turns immediately on but shuts off. The power cable may be connected improperly, Make sure the power cable is plugged outlet firmly. A speaker Make sure all speaker cables properly. This system cable may be shorted.
JI]l]ll[I]i_f:illh_l_l];ti_f:¥1[I]i- The remote control does not operate the The system may be outside the remote control operation range, For information on the remole control operation range, relbr to "Using the remote control". The remote control sensor of this system may be exposed to direct sunlight or Change the lighting. - 7 system. lighting. The batteries • may be worn out. Replace the batteries.
• Bluetooth Ill case of a transmission :iii;,!!!=.!!!_!"c:.i"_ J.!"_g...... error without a status message appearing ill the front The Yamaha Bluetoolh audio receiver (such as YBA-10, sold separately) and the Blueloolh component are in the process of the pairing. The Yamaha Bluetooth (such as YBA-10, audit) receiver sold separately) panel, check your Bluetooth \ "\ ,\ \ ,\ and the Bluetooth component are in the process establishing the connection. ('.i:0rqF:"i WIM:.
• AIR SURROUND XTREME New surround technology developed by Yamaha enables surround sound with fewer speakers. In comparison to traditional front surround technology, the AIR SURROUND XTREME provides a natural surround sound field. • Channel (ch) A channel is an audio type that has been divided based on range and other characteristics. Ex. 7.
FM Tuner YAS-71CU • Type ................... • Driver 2 way acoustic suspension magnetic shiehling type Woofer ............ 8 cm (3") cone magnetic shielding type x 4 (L2, R2) Tweeter ............. 2.5 cm (1 ") balanced dome magnetic shielding type x 2 (LI, RI ) • Frequency Response ................................ 120 Hz to 20 kHz (-10 dB) • Dimensions (W x H x D) .................................. 800 x 105 x 100 mm (Approx. 31-112" x 4-118" x 3-15116") • Weight ....................................
@ _J_I_mTEDWITH l /_ISOYINKL © 2008 Yamaha Corporation YAMAHA CORPORATION AJl rights reserved.