Owner's Manual
Table Of Contents
- Owner's Manual
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware automatically
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
- Quick Start Guide
- Update Guide
- Safety Brochure
- Warranty
- Product Registration
NOTICE AND INFORMATION
Notice
Indicates points that you must observe in order to prevent product
failure, damage or malfunction and data loss.
Power supply
• If not using the unit for a long period of time, be sure to pull the power
plug from the outlet. Even if this unit is turned off by [z](Standby/
On), a minute current is still flowing.
Installation
• Do not use this unit in a location that is exposed to direct sunlight that
becomes extremely hot, such as near a heater, or extremely cold, or
that is subject to excessive dust or vibration. Failure to observe this
may cause the unit's panel to become deformed, the internal
components to malfunction, or for operation to become unstable.
• If using a wireless function, avoid installing this unit near metal walls
or desks, microwave ovens, or other wireless network devices.
Obstructions could shorten the transmission distance.
Connections
• If connecting external units, be sure to thoroughly read the manual for
each unit and connect them in accordance with the instructions.
Failure to properly handle a unit in accordance with the instructions
could cause malfunctions.
• Do not connect this unit to industrial units.
This unit has been designed to connect to a consumer-use unit.
Connection to an industrial unit could cause this unit to malfunction.
Handling
• Do not place vinyl, plastic, or rubber products on this unit. Failure to
observe this may cause discoloration or deformation in the panel of
this unit.
• If the ambient temperature changes drastically (such as during unit
transportation or under rapid heating or cooling) and there is a chance
condensation may have formed in the unit, leave the unit for several
hours without turning on the power until it is completely dry before
use. Using the unit while there is condensation can cause
malfunctions.
Maintenance and care
• When cleaning the unit, use a dry, soft cloth. Using chemicals such as
benzine or thinner, cleaning agents, or chemical scrubbing cloths can
cause discoloration or deformation.
About disposal
• Be sure to discard used batteries in accordance with local regulations.
En
8