Owner's Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
4
Connecting an external
subwoofer
Connecting an external subwoofer
The unit has dual built-in subwoofers; however you can connect a
subwoofer equipped with built-in amplifier when you want to enhance
low frequency sound.
Connect an external subwoofer to the unit via an RCA mono cable (sold
separately).
SUBWOOFER OUT jack
The unit (rear)
Input jack
Subwoofer equipped with
built-in amplifier.
n NOTE
Sound is output from both the built-in subwoofers and external subwoofer.
5 Connecting to power
Connecting to power
Once all connections have been made, connect the unit to power as
shown in the following illustration.
The unit (rear)
To an AC wall outlet
Power cord (supplied)
En
18