Owner's Manual

000
000
000
000
D
• Pairing
Pairing must be performed when making
Bluetooth connections for the first time
or if the I
pairing information has been deleted.
Pairing refers to the operation
of registering the
device with which signals are to be exchanged
(Bluetooth profile A2DP or AVRCP-compatible
portable music player, mobile phone, etc.) on this
unit.
For pairing, see the operating instructions
of the
YBA-I0 compatible component (AV receiver,
etc.) to which YBA-lO is connected.
-
Within 10m (33 ft)
• Installation
Install in a stable place, being careful of the
following points:
• Do not place on top
of steel or other metal
plates.
• Do not cover with a cloth, etc.
• Install in the same room as the device with
which signals are to be exchanged (Bluetooth
profile A2DP or AVRCP-compatible portable
music player, mobile phone, etc.) within a
direct, line-of-sight distance
of 10 m (33 ft).
• Make sure there are no obstacles between this
unit and the other device.
• This unit can be paired with up to eight other
components. When pairing is conducted
successfully with a ninth component and the
pairing data
is registered, the pairing data for
the least recently used other component is
cleared.
• This unit is compatible with the Bluetooth
A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio and Video Remote Control
Profile) profiles, but depending on the type
of
AV receiver connected to this unit and the
Bluetooth-compatible player you are using, it
may not be possible to use all
of the AVRCP
control functions.
3 En