Digital Percussion Owner’s Manual EN
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Water warning • Only use the voltage specified as correct for the instrument.
• Before moving the instrument, remove all connected adaptor and other cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
Congratulations! Thank you for purchasing the Yamaha DD-65/YDD-60. The DD-65/YDD-60 has been developed to respond and play like a drum set— but with greater ease, flexibility and sophisticated functions. Before you use the instrument, we recommend that you carefully read through this manual. Main features The DD-65/YDD-60 is a sophisticated yet easy-to-use instrument with the following features and functions.
Contents Main features ........................................................6 Setting Up 8 Power Requirements ............................................8 Panel Controls 10 Playing the Demo Song 12 Adjusting the volume...........................................12 SONG VOLUME .................................................12 Play the Pads/Pedals 30 What is MIDI?..................................................... 30 What You Can Do With MIDI .............................
Setting Up Be sure to do the following operations BEFORE turning on the power. Power Requirements Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. Using an AC Power Adaptor q Make sure that the power of the instrument is off (display shows no indications).
Setting Up Connecting headphones (PHONES/OUTPUT Jack) voices as well. Connect the supplied Pedal 1 to the PEDAL 1 jack and Pedal 2 to the PEDAL 2 jack. NOTE The DD-65/YDD-60 speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device.
Panel Controls ● Front Panel !9 001 001 !8 e w q r !0 t y u i o !4 !56 !1 !6 !2 !3 !7 Front Panel q w e r t y u i o !0 !1 !2 !3 !4 !5 10 [MASTER VOLUME] control..................... 12 DIAL........................................................... 15 [ASSIGN] button ....................................... 16 [REVERB] button...................................... 17 [HAND PERC.] button .............................. 14 [KIT] button ...............................................
Panel Controls ● Rear Panel CAUTION @5 Pedal 1 @4 @3 @2 @1 • Since speakers are built into the DD65/YDD-60, you should be careful to never leave any video tapes, cassette tapes, floppy disks or any kind of magnetic storage media on the panel—doing so may result in data loss or damage to the items. Also avoid using the DD-65/YDD-60 near a television or computer monitor, since interference may result. • Use the sticks with caution. Do not use them for anything other than playing the instrument.
Playing the Demo Song The DD-65/YDD-60 features several demonstration songs (001–005), specially created to show you the dynamic possibilities of the instrument. 1 Turn on the power. Turn on the [STANDBY/ON] switch on. CAUTION • Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level.
Play the Pads/Pedals Strike the pad with the supplied drum sticks or your hands to play the drum voices. When playing the pads with your hands, turn the Hand Percussion feature on by pressing the [HAND PERC.] button (the lamp lights). The volume of the pads’ sounds responds to your playing; when you play soft the volume is soft, and when you play strongly the volume is loud. The actual loudness of the sound may vary according to which part of the pad is struck. Pad Names ● Ex.
Play the Pads/Pedals Setting the Hand Percussion ON/OFF You can play the pads of the instrument either with the supplied sticks or with your hands. Press and set the following button when you play the instrument with your hands. 1 Press the [HAND PERC.] button. When you press the [HAND PERC.] button, the button’s lamp lights, and the pad sensitivity is automatically adjusted for optimum playing by hand. At the same time, an appropriate song (059) and drum kit(37) are automatically called up.
Play the Pads/Pedals Selecting a Drum Kit and play it The instrument allows you to choose from 50 different Drum Kits (1–50: see the “Drum Kit List” page 41) quickly and easily. 50 of the kits have preset voice combinations that will be set to the pads and pedals when the kit is selected. Select some different kits and try playing them.
Play the Pads/Pedals Assigning Voices to Individual Pads and Pedals and saving to a Custom Kit (“CO1– CO3”) The instrument contains a total of 254 high quality drum sounds plus 25 drum phrases (see the “Drum Voice List” page 38)—and you can assign these freely to each of the 8 drum pads and 2 pedals. Try assigning some different voices and save your own “CO1– CO3” Custom Drum Kits. • Custom Kit “ CO1– CO3” and “ 01” drum kit contents are the same until modified (see the “Drum Kit List” page 41).
Play the Pads/Pedals 5 Save to a Custom kit. Press the [ASSIGN] button to save to a Custom kit (the lamp will be off). To cancel the saving, simply press the [KIT], [SONG] or [DEMO] button. CO1 After you’ve assigned the voice, the instrument will automatically be set to the assigned custom kit. You can now play the voice you have assigned to the pad/pedal. Setting the Reverb ON/OFF Different depths of the DD-65/YDD-60’s reverb effect can be added to the DD-65/YDD-60’s overall sound.
Play the Pads/Pedals Setting the Pad Sensitivity The instrument allows you to custom-set the sensitivity of the pads (range 0–2). When set to a value of 2, the pad sensitivity is the highest, providing the most dynamic range for your playing (softest to loudest volume). 1 SnS Enter the Pad Sensitivity setting function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the “SGL” item appears.
Play the Pads/Pedals Setting the Click ON/OFF The instrument includes a click sound with adjustable tempo and time signature. Press the [CLICK] button. The click sounds in rhythm at the current tempo. (See “Adjusting the Tempo” on page 25.) To turn the click off, press the button once again. Setting the Time Signature of the Click ■ Setting the numerator of the time signature ................................... The range is 0 to 16. The first beat is accented with a bell sound and the rest with clicks.
Play the Pads/Pedals ■ Setting the denominator of the time signature ............................... Set the basic note value for each measure. 1 Enter the denominator value setting function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the “CL2” item appears. After a while, the current denominator value appears next to the “CL2” indication. CL2 2 Set the denominator value of the time signature.
Play the Pads/Pedals Setting Equalization On/Off When you use the internal speakers, set Equalization to ON (default setting is on). When you use headphones or external speakers, set this to off. 1 Enter the Equalization setting function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the “Eq” item appears. After a while, the current On/Off setting will appear next to the “Eq” indication. Eq 2 Set the Equalizer On/Off.
Playing a Song This instrument features 100 different songs (five demo songs, as well as Rhythm patterns and Fill-in patterns) that can be used to provide accompaniment. (See the “Song List” on page 40.) U01–U05 can also be used to playback songs you’ve recorded yourself and/or loaded from computer. Refer to the section “Transferring Song files to and from a connected computer” on page 34 for details. Select one of the songs and listen to it. Selecting and playing a Song 1 010 Press the [SONG] button.
Playing a Song Tap Start The Tap Start function allows you to set the song’s overall tempo as well as start the accompaniment—simply by tapping out the rhythm. The accompaniment will playback at the tempo with which the pads are struck or the pedals are pressed. 1 Press the [BREAK/TAP] button. While song playback is stopped, press the [BREAK/TAP] button. All three of the beat lamps flash, indicating the instrument is set to Tap Start standby.
Playing a Song Setting the Auto Kit Select ON/OFF With the Auto Kit Select feature turned on, the best suited Drum Kit for the song will automatically be selected. If Auto Kit Select is OFF, the Drum kit does not change even if the song number is changed. 1 AtS Enter the Auto Kit Select function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the “AtS” item appears. After a while, the current On/Off status will appear next to the “AtS” indication.
Playing a Song Adjusting the Tempo The song tempo and Click tempo can be set anywhere from 11 to 320 beats per minute. The higher the tempo value, the faster the tempo. 1 120 Press the [TEMPO] button. The current tempo value (11–320) appears in the display. 2 Set the Tempo. Use the DIAL to select the TEMPO. Turn the DIAL to the right (clockwise) to increase the Tempo value, and turn it to the left (counter-clockwise) to decrease the value.
Play along with a Song Use the pads and pedals to play along with the song accompaniment. NOTE • The instrument can play a total of 32 notes simultaneously. That includes notes produced by song accompaniment, pads, foot pedals, and note data received through the MIDI IN jack. Setting the Track ON/OFF The instrument’s song accompaniment consists of 4 tracks: Drum tracks 1, 2, and 3, and the Backing track.
Play along with a Song 3 Exit the Break mode. To exit the Break mode, press the [BREAK/TAP] button. The Break mode is also exited when the song is stopped. NOTE • The Break does not function if DEMO is started. Using A-B Repeat If you want to practice a particular section of a song, you can specify that section’s “A” (start repeat) and “B” (end repeat) points. The accompaniment will continuously repeat between points “A” and “B” allowing you to practice between those points for as long as you like.
Recording a Song The User Songs feature (song number UO1–UO5) allows you to record and playback five original songs (Maximum 10,000 notes approximately per song). Data that can be recorded in the User Song Mode • Drum pad and pedal played data • Song data (the number cannot be changed while in the RECORD Mode) • Track On/Off settings • Tempo setting (The tempo cannot be changed while in the RECORD mode) • Song Volume setting Recording 1 001 U01 Prepare to Record.
Recording a Song 5 Stop Recording. To stop recording, press the [START/STOP] button. NOTE • If the memory becomes full while recording is in progress, “ FL” will appear in the display and recording will automatically stop. CAUTION • Please note that if, in step 3, you select a User Song which has been recorded or contains data, it will be overwritten with new data. • While the data is being recorded (“-”appears and moves from left to right on the display), never interrupt the power supply (e.g.
About MIDI The MIDI IN and MIDI OUT terminals, located on this instrument’s rear panel, allow connection to other MIDI instruments, devices and computers for expanded musical functionality—for example, using this instrument to play sounds on other instruments, or for recording your performance to a sequencer or computer. NOTE • Preset song data cannot be transmitted via the MIDI OUT terminal.
About MIDI A Yamaha UX16 or similar USB-MIDI interface (sold separately) will be necessary for MIDI connection between the instrument and a USB equipped computer. Make sure to purchase a Yamaha UX16 or a quality USB-MIDI interface at a musical instrument store, computer store or electrical appliance store. If you use the UX16 interface, install the driver supplied with the interface on your computer. NOTE • When using a computer, special software (sequencer software) is needed.
About MIDI Setting the MIDI Note Number Each pad and pedal (10 total) can be assigned a specific MIDI note number anywhere from C-2 to G8. NOTE • For information on transmit notes and voices, refer to the “Drum Map” on page 48. 1 Enter the MIDI Note number setting function. Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the “not” item appears. After a while, the MIDI note number currently assigned to Pad 1 appears next to the “not” indication.
About MIDI MIDI Note Number Auto Selection ON/OFF Ordinarily, you should keep this function set to on for the instrument (default setting is on). When MIDI Number Auto Selection is on and you strike the pad, the MIDI note number corresponding to the pad (voice) you strike is sent via the MIDI OUT terminal. On the other hand, when MIDI Number Auto Selection is off and you strike the pad, the MIDI note number that you’ve specifically assigned to the pad is sent via the MIDI OUT terminal.
About MIDI Transferring Song files to and from a connected computer Even though this instrument has 100 preset songs, you can also transmit Song files from your computer to this instrument’s Flash memory. Since the area in Flash memory is shared between User songs (U01–O05) and loaded songs, you may need to erase some User songs to load the data. Files of SMF format 0 that you’ve loaded to the instrument can be played.
About MIDI ■ Transferring song files from a computer ......................................... You can transmit Song files from your computer to your instrument’s Flash Memory. For details about how to transmit the data using the Musicsoft Downloader application, refer to the Online help topic “Transferring Data Between the Computer and Instrument (for unprotected data)” of the Musicsoft Downloader.
Appendix Backup and Initialization......................................................... Backup Some internal parameters will be backed up to internal memory even if the power is turned off. You can initialize all internal memory to the default settings or initialize the memory excepting the Songs.
Appendix Troubleshooting ....................................................................... In many cases, problems or malfunctions that occur during use can be remedied easily. Please check the following list before deciding that your instrument is damaged. If the suggested remedy is ineffective, take the instrument to an authorized Yamaha dealer for proper diagnosis and repair. Do not attempt to repair this digital instrument by yourself as serious damage may occur.
Appendix Drum Voice List Drum Voice List ........................................................................ ● Panel Voice List Voice No.
Appendix Voice No.
Appendix Song List Song List .................................................................................. Song No.
Appendix Drum Kit List Drum Kit List ............................................................................ Small Pad 1 Small Pad 3 Pad 2 Pad 3 Small Pad 2 Small Pad 4 Pad 1 Pad 4 Pedal 2 Kit No.
Appendix Small Pad 1 Small Pad 3 Pad 2 Pad 3 Small Pad 2 Small Pad 4 Pad 1 Pad 4 Pedal 2 Kit No.
Appendix Kit No.
Appendix Voice List Voice List .................................................................................. ■ Maximum Polyphony The instrument has 32-note maximum polyphony. This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used. Auto accompaniment uses a number of the available notes, so when auto accompaniment is used the total number of available notes for playing on the pads is correspondingly reduced.
Appendix Bank Select * MSB (0–127) LSB (0–127) 0 0 0 112 113 113 0 0 0 0 0 0 0 0 112 112 112 112 112 112 112 112 127 127 127 127 127 127 127 127 127 127 127 127 126 126 126 126 126 126 126 126 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 40 41 0 1 0 1 32 0 1 0 1 32 0 1 32 41 0 1 35 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 64 0 1 0 1 64 97 98 0 MIDI Program Voice Name Change# (1–128) 89 Fantasia 90 Dark Moon 101 Bell Pad PERCUSSION 12 Vibraphone 13 Marimba
Appendix Bank Select * 46 MSB (0–127) LSB (0–127) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 18 40 43 45 65 0 28 0 32 33 34 0 32 0 43 0 40 0 6 12 18 19 40 41 0 0 0 0 0 0 0 0 0 0 0 0 0 8 0 0 0 0 8 40 0 0 40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 8 35 40 41 42 45 0 3 8 40 41 0 0 0 3 32 40 0 0 40 41 64 0 35 64 0 0 0 0 32 0 MIDI Program Voice Name Change# (1–128) 34 Finger Bass 34 Finger Dark 34 Bass & Distorted Electric Guitar 34 Finger Slap Bass 34 Finger Bass 2 34
Appendix Bank Select MSB (0–127) LSB (0–127) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 65 66 0 27 0 12 14 18 35 40 41 42 65 70 71 72 0 18 19 40 64 65 66 0 0 64 65 67 68 70 71 96 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 32 35 97 0 28 96 97 98 0 0 96 97 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 96 97 98 99 100 0 0 97 98 0 96 MIDI Program Voice Name Change# (1–128) 94 Metallic Pad 95 Halo Pad 96 Sweep Pad XG SYNTH EFFECTS 97 Rain 97 African Wind 97 Carib 98 Sound Tra
Appendix Drum Map Drum Map ................................................................................. • “ ” indicates that in the column on the immediate left. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lower than listed. For example, in “Standard Kit 1”, the “Seq Click H” (Note# 36/Note C1) corresponds to (Note# 24/Note C0).
Appendix MSB (0–127) / LSB (0–127) / PC (1–128) Keyboard MIDI Key Alternate Note# 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 Note C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D
Appendix MSB (0–127) / LSB (0–127) / PC (1–128) Keyboard MIDI Key Alternate Note# 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 50 Note C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C#
Appendix MSB (0–127) / LSB (0–127) / PC (1–128) Keyboard MIDI Key Alternate Note# 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 Note C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D# E F F# G G# A A# B C C# D D
DD-65/YDD-60 Owner’s Manual Mode Key's Ch's After Touch Change Control 0,32 1 7 10 11 84 6,38 64 71,72,73,74 91 93 96-97 100-101 Pitch Bend Note ON Note OFF Velocity x x x x x x x x x o x x x x x x o 9nH,v=1-127 x 9nH,v=0 *3 *3 *3 *3 *3 *3 *3 *1 *3 *3 0 - 127 : True voice ************** 3 x ************** Default Messages Altered Note Number 1O x Default Changed Basic Channel Function...
: True # x x x x o x Aux Mode 1 : OMNI ON , POLY Mode 3 : OMNI OFF, POLY :All Sound OFF :Reset All Cntrls :Local ON/OFF :All Notes OFF Mes- :Active Sense sages:Reset o o x x x o o(120,126,127) o(121) o(122) o(123-125) o x x x x x x o o 0 - 127 Mode 2 : OMNI ON ,MONO Mode 4 : OMNI OFF,MONO *4 x ************** System : Clock Real Time: Commands Common : Song Pos. : Song Sel.
Appendix NOTE: *1 Value of Pan for each drum pad and foot pedal is not transmitted via MIDI. F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H • mm : Chorus Type MSB • ll : Chorus Type LSB Refer to the Effect Map (page 54) for details. *2 The DD-65/YDD-60 can accept Start/Stop signals, received via MIDI, by setting the MIDI clock to “External”.
Appendix Specifications Specifications ..........................................................................
Appendix Drum Score Drum Score .............................................................................. There are many different types of drum score commercially available, but we’ve chosen the following common format for the examples below. Hi-Hat Cymbal (H.H.) Ride Cymbal (RIDE) Hi-Hat (H.H.) Open Close Crash Cymbal Snare Drum Snare Drum (Brush Slap) High Tom Low Tom High Hi-Hat Cymbal (PEDAL) Bass Drum The following is an actual rhythm pattern using the notation. ■ 8 Beat (song No.
Appendix ■ 4 Beat (song No.042) (RIDE) In the notation above, eighth notes are to be played with a triplet feel (as shown in the notation below). For swing and shuffle rhythms, this straight notation is preferable to the triplet indication since it is easier to read. ■ Shuffle (song No.030) Play the above pattern with a swing feel. ■ 16 Beat Shuffle (song No.026) Play the above pattern with a swing feel.
Limited Warranty 90 DAYS LABOR 1 YEAR PARTS Yamaha Corporation of America, hereafter referred to as Yamaha, warrants to the original consumer of a product included in the categories listed below, that the product will be free of defects in materials and/or workmanship for the periods indicated.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
Yamaha Home Keyboards Home Page (English Only) http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2007 Yamaha Corporation WJ46680 703POXXXX.