User Manual

Keyboard Stand Assembly

YDP-164, YDP-144, YDP-S54 Owner’s Manual

7. Connect the pedal cord.

7-1 Insert the pedal cord plug to the

[TO PEDAL] jack from the rear.

7-2

Securely wind the cord holder around the

pedal cord.

The cord holder is attached to D.

7-3 Use a vinyl tie (Step 1-1) to take up any

slack in the pedal cord.

8. Connect the AC adaptor.

8-1 Connect one end of the power cord to the

power adapter.

8-2 Insert the AC adaptor plug into the DC IN

jack from the rear.

9. Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

Insert the pedal cord securely

until the metal part of the cord

plug disappears from view.

Otherwise, the pedal may not

function properly.

7-1

7-2

7-3

After completing the assembly, make sure to confirm the

list of post-assembly questions on page 33.