Operation Manual

YDP-C71 Owner’s Manual
Appendix
29
ENGLISH
2-5 Securely tighten the screws on the top of B that
were attached in Step 2-2.
3 Securely tighten the screws on C that were
attached in Step 1-3.
4 Mount A.
5 Secure A.
5-1 Adjust the position of A so that the left and right
ends of A will project beyond D and E equally
when seen from the front.
5-2 Secure A by tightening the short screws 2 (6 
16 mm) from the front.
R
L
E
2-2, 2-5
2-4
2-3
D
B
2-3
2-1
Place the bot-
tom ends of the
rear panel on
each foot.
3
C
B
R
A
D
E
B
Be sure to place your hands at least 10
cm from either end of the main unit
when positioning it.
At least
10 cm
CAUTION
• Fingers can become pinched between the main unit
and the rear or side panels, be extra careful so as not
to drop the main unit.
• Do not hold the keyboard in any position other than
the position shown in the illustration.
5-1
A
A
5-2
Projection of A