User Manual

YDP-165, YDP-145, YDP-S55, YDP-S35 MIDI Reference
3
Voice List
The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change
messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive
parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer.
(However, the Voice as played from the keyboard is maintained and does not change.)
For information on program
change numbers for each of
the Voices of the instrument,
see the “Voice List” below.
Default setting: ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 key. Pressing the
C4 key repeatedly toggles between Local Control On and Off.
Information related to non-note expressive changes, such as the use of a sustain pedal, is called “control change” in
MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For
example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument
can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played
from the instrument is maintained and does not change.)
For information on control
changes that can be used with
the instrument, see “MIDI
Implementation Chart” page 4.
Default setting: ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C#4 key. Pressing
the C#4 key repeatedly toggles between Local Control On and Off.
Voice List
Program Change ON/OFF
C4 Highest key
Control Change ON/OFF
C#4
Highest key
Voice Name
MSB
(0-127)
LSB
(0-127)
Program Change #
(1-128)
CFX Grand 108 0 1
Mellow Grand 108 1 1
Pop Grand 108 1 2
Stage E.Piano 108 0 5
DX E.Piano 108 0 6
Harpsichord 108 0 7
Vibraphone 108 0 12
Pipe Organ 108 1 20
Jazz Organ 108 0 17
Strings 108 0 49