Owner's Manual IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 29UM67 34UM67 www.lg.
Contents ENGLISH ENG CONTENTS 3 4 LICENSE ASSEMBLING AND PREPARING 4 Product Components 5 Component and Button Description 6 - How to Use the Joystick Button 7 Moving and Lifting the Monitor 8 Installing the Monitor 8 - Assembling the stand base 10 - Using the cable holder 11 - Installing onto a table 12 - Adjusting the angle 13 - Using the Kensington lock 13 - Installing the wall mount plate 14 - Installing to a wall 15 USING THE MONITOR 15 Connecting to a PC 15 - DVI co
LICENSE 3 Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. VESA, VESA logo, Display Port Compliance Logo and Display Port Compliance Logo for dual-mode source are all registered trademarks of the Video Electronics Standards Association.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Product Components Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. OPTIONAL ACCESSORIES CD(Owner's Manual) / Card Display Port Cable The DisplayPort cable may not be available in some areas.
ASSEMBLING AND PREPARING 5 Component and Button Description ENG ENGLISH Power Indicator y yOn: power is on y yOff: power is off Joystick Button Input Connector
ASSEMBLING AND PREPARING How to Use the Joystick Button ENGLISH ENG You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor. Volume Control You can control the volume by moving the joystick button left/right.
ASSEMBLING AND PREPARING Moving and Lifting the Monitor CAUTION As far as possible, avoid touching the moniyy tor screen. This may result in damage to the screen or some of the pixels used to create images. It is advisable to place the monitor in the yy original box or packing material before attempting to move it. Before moving or lifting the monitor, disconyy nect the power cord and all cables. Hold the top and bottom of the monitor frame yy firmly. Do not hold the panel itself.
ASSEMBLING AND PREPARING Installing the Monitor 4 Tighten two screws into the back of the stand ENGLISH ENG body . Assembling the stand base 29UM67 1 Place the screen face down. CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. (Black) 2 First, please insert Stand Body to Stand Base, Then tighten two screws into the back of the stand base.
ASSEMBLING AND PREPARING 9 or 34UM67 ENG ENGLISH 1 Place the screen face down. 100 mm Stand Hinge Screw Cover CAUTION y y To protect the screen from scratches, cover the surface with a soft cloth. 2 Mount the stand base onto the stand hinge as shown in the illustration. Fix two screws into the back of the stand base and close the screw cover.
ASSEMBLING AND PREPARING Using the cable holder ENGLISH ENG 29UM67 1 First, as shown in the illustration,push the cable holder on the stand body, Second ,Fix the cable holder to stand body. Stand Body 2 Put the cables into the cable holder. 34UM67 Tidy up cables using the cable holder on the stand base as shown in the illustration. NOTE y y Cables can get caught in the hinge area as shown in the illustration, so be careful when organizing cables.
ASSEMBLING AND PREPARING 11 Installing onto a table upright position. Place at least 10 cm away from the wall to ensure sufficient ventilation. 3 Press the joystick button on the bottom of the monitor to turn on the monitor. CAUTION Unplug the power cord prior to moving or yy installing the monitor. There is risk of electric shock. 10 cm 10 cm 10 cm 10 cm 2 Connect the power adapter to the monitor and then plug the power cord into the wall outlet.
ASSEMBLING AND PREPARING Adjusting the angle WARNING ENGLISH ENG 1 Place the monitor in an upright position, mounted on the stand base. 2 Adjust the angle of the screen. The angle of the To avoid injury to the fingers when adjusting yy the screen, do not hold the lower part of the monitor's frame as illustrated below. screen can be adjusted forwards or backwards for a comfortable viewing experience. Be careful not to touch or press the screen yy area when adjusting the angle of the monitor.
ASSEMBLING AND PREPARING 13 Installing the wall mount plate The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. This monitor supports the specification of the standard wall mount plate or compatible device. Connect the Kensington security system cable between the Monitor set and a table.
ASSEMBLING AND PREPARING Wall Mount (A x B) yy Installing to a wall A ENGLISH ENG Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.
USING THE MONITOR 15 Connecting to a PC This monitor supports the *Plug and Play yy feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers. DVI connection Transmits digital video signals to the monitor. Connect the monitor using the DUAL DVI cable as illustrated below. Press the menu button and then select the input option from the input menu.
USING THE MONITOR ENGLISH ENG DisplayPort connection HDMI connection Transmits the digital video and audio signals from your PC to the monitor. Connect your PC to the monitor using the display port cable as illustrated below. Press the menu button and then select the input option from the input menu. Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below.
USING THE MONITOR Connecting to AV Devices Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. Connecting to External Devices Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated.
INSTALLING LG Monitor Software 29UM67 34UM67 ENGLISH ENG INSTALLING THE LG MONITOR SOFTWARE Installing The Screen Split Insert the the owner's manual CD included in the product package into your PC's CD driver and install the Screen Split. The installation screen images are for reference only. The actual installation screen images may vary depending on the model. 1 Set the default Web browser to Internet Explorer. 2 Click the "Screen Split" on the CD's main screen.
INSTALLING LG Monitor Software 5 The Screen Split installation starts as shown NOTE Screen Split: This program automatically yy splits the program window as desired. Monitor Selection only supported in extend display. This program supported Windows 7 & Windows 8. 6 When the installation is complete, restart your system. NOTE If you run Screen Split, the Screen Split icon [ ] appears in the system tray at the right bottom of the PC screen. Right-click the Screen Split icon and select a layout you want.
INSTALLING LG Monitor Software Installing The Dual Controller ENGLISH ENG Insert the owner's manual CD included in the product package into your PC's CD driver and install the Dual Controller. The installation screen images are for reference only. The actual installation screen images may vary depending on the model. 1 Set the default Web browser to Internet Explorer. 3 Follow the instructions to proceed with the installation. 2 Click the "Dual Controller" on the CD's main screen.
INSTALLING LG Monitor Software 6 The Dual Controller installation starts as shown 7 When the installation is complete, restart your system. NOTE If you run Dual Controller, the Dual Controller icon [ ] appears in the system tray. Click the Dual Controller icon and select a layout you want. ENG ENGLISH below.
User Settings USER SETTINGS ENGLISH ENG Activating the Main Menu 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button once more to exit the main menu. Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor.
User Settings 23 Customizing settings ENG ENGLISH Menu Settings -Quick Settings 1 To view the OSD menu, press the joystick button at 2 3 4 5 the bottom of the monitor and then enter the Menu. Go to Quick Settings > Brightness by moving the joystick. Configure the options following the instructions that appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
User Settings -PBP ENGLISH ENG 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to PBP by moving the joystick. 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
User Settings 25 -Picture the bottom of the monitor and then enter the Menu. Go to Picture by moving the joystick. 2 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, 5 move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below. Menu > Picture Picture Mode Description Custom Allows the user to adjust each element.
User Settings Picture Adjust Sharpness ENGLISH ENG Black Level Game Adjust Adjusts the sharpness of the screen. Sets the offset level (for HDMI only). y y Offset: as a reference for a video signal, this is the darkest color the monitor can display. High The picture of the screen gets brighter. Low The picture of the screen gets darker. DFC Adjusts the brightness automatically according to the screen. Response Time Sets a response time for displayed pictures based on the speed of the screen.
User Settings 27 -Sound ENG ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Sound by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
User Settings -General ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to General by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
User Settings 29 -Reset ENG ENGLISH 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Nothing is displayed on the screen. Is the monitor's power cord plugged in? Check if the power cord is correctly plugged into the power outlet. yy Is the power LED on? Check the power cable connection and press the power button. yy Check that the connected input is enabled (Menu > Quick Settings yy > Input). If the monitor is in sleep mode, move the mouse, or press any key yy on the keyboard, to switch the display on. Check if the computer is turned on.
TROUBLESHOOTING 31 NOTE The display color is abnormal. Does the display appear discol-ored (16 colors)? Does the display color appear unstable or monochrome? Are there spots on the screen? Set the color to 24 bit (true color) or higher. In Windows, go to yy Con-trol Panel > Display > Settings > Color Quality. Check if the signal cable is connected properly. Reconnect the yy cable or reinsert the PC's graphics card.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 29UM67 LCD Screen Type Resolution Pixel Pitch Maximum Resolution TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen 0.2628 mm x 0.2628 mm 2560 x 1080 @ 60 Hz Input Connector Recommended Resolution 2560 x 1080 @ 60 Hz Horizontal Frequency 30 kHz to 90 kHz Vertical Frequency DVI: 56Hz to 75 Hz HDMI:(AV)25Hz to 60 Hz (PC)56Hz to75 Hz DP: 56 Hz to 75 Hz Synchronization Separate Sync.
SPECIFICATIONS 34UM67 LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen 0.312(H) mm x 0.310(V) mm 2560 x 1080 @ 60 Hz Recommended Resolution 2560 x 1080 @ 60 Hz Horizontal Frequency 30 kHz to 90 kHz Vertical Frequency DVI: 56Hz to 75 Hz HDMI:(AV)25Hz to 60 Hz (PC)56Hz to75 Hz DP: 56 Hz to 75 Hz Synchronization Separate Sync.
SPECIFICATIONS ENGLISH ENG Factory support mode (DVI-D/ HDMI/ DisplayPort) Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75.029 +/+ 1152 x 864 67.5 75 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1280 x 1024 79.976 75.
PROPER POSTURE 35 Proper Posture for Using the Monitor Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level. Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time yy usage. The stand of the touch monitor allows the product to be used in the optimum position. yy Adjust the stand angle to obtain the best view of the screen. You should be looking slightly down at the screen.
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
