User Manual

Setting Up
13
YDP-103 Owner’s Manual
To prevent unnecessary power consumption, this
function automatically turns the power off if no
buttons or keys are operated for approximately 30
minutes. If desired, you can disable or enable this
function.
To disable the Auto Power Off function:
When the instrument is turned off:
While holding down the lowest key (A-1), press the
[P] (Standby/On) switch to turn on the power so that
the power indicator flashes three times, after which the
Auto Power Off function is disabled.
When the instrument is turned on:
While holding down [GRAND PIANO/FUNCTION],
press the lowest key (A-1).
To enable the Auto Power Off function:
While holding down [GRAND PIANO/FUNC-
TION], press the A♯-1 key.
Because of the simple, piano-like design of this
instrument, there are a minimum of panel controls,
and most settings are made using the keys of the
keyboard. When you turn a function on or off, or
change a setting, the instrument produces a sound
to confirm the change. For a list of the functions
assigned to the buttons and keys, see the included
“Quick Operation Guide.”
Setting the Operation Confirmation
Sounds On or Off
When a setup is changed using a button and key
combination, an operation sound (“On,” “Off,”
click, tempo value input) is sounded. This confir-
mation sound can be enabled (ON) or disabled
(OFF) as desired.
Turning the Operation C onfirm ati on Sounds on
Press the C7 key while holding down [GRAND PIANO/
FUNCTION].
Turning the Operation C onfirm ati on Sounds off
Press the C7 key while holding down [GRAND PIANO/
FUNCTION].
Default setting: on
Since this instrument is equipped with two
[PHONES] jacks, you can connect two sets of stan-
dard stereo headphones. If you are using only one
set of headphones, insert a plug into either jack.
Inserting headphones automatically turns off the
speakers.
CAUTION
Do not use headphones at a high volume for an extended
period of time; doing so may cause hearing loss.
Auto Power Off Function
Setting the Operation
Confirmation Sounds
A-1
A-1
A#-1
Using Headphones
C7
PHONES
Bottom surface
Standard stereo phone plug