Operator`s manual

1
2
3
4
5
6
7
8
9
10
11
MAINTENANCE
8-5
JW1
Engine Oil Replacement
1. Warm up the engine for several
minutes, place the golf car on a
level surface, then stop the
engine.
Use caution not to touch hot
engine oil or hot engine parts,
during the following procedure.
2. Place an oil pan under the
engine drain plug.
3. Remove the oil drain plug and let
the oil drain completely.
Dispose of used oil in an
environmentally safe way, such as
taking oil to an oil collection station.
4. Install the drain plug, along with
a new drain plug gasket, finger-
tight before tightening to the
following torque:
Drain plug torque:
23 ft
.
lb
(31 Nm, 3.1 m
.
kg)
5. Add the correct quantity of oil
through the oil filler hole.
Recommended engine oil
classification: API Service SE, SF, or
SG. Engine oils labeled “Energy
Conserving II” are recommended.
NOTE:
NOTE:
Recommended oil:
YAMALUBE 4-cycle oil or
SAE 10W-30
Engine oil capacity:
1.0 US qt
(1.0 L, 1000 cc)
Oil change quantity:
1.0 US qt
(1.0 L, 1000 cc)
Y-6 24
LIT_19626_11_07.qxd 10/5/06 10:42 AM Page 29