Service manual
3 - 34
CHK
ADJ
CHECKING THE V-BELT/
CLEANING THE SPARK ARRESTER
4.Replace:
●
V-belt
*****************************************************
Replacing steps:
●
Install the bolts 1 (90101-06016) into the
secondary fixed sheave hold.
N
OTE:
Tightening the bolts 1 will push the secondary
sliding sheave away, causing the gap between
the secondary fixed and sliding sheaves to
widen.
●
Remove the V-belt 1 from the primary
sheave and secondary sheave.
●
Install the V-belt.
N
OTE:
Install the V-belt so that its arrow faces the
direction shown in the illustration.
●
Remove the bolts.
*****************************************************
CLEANING THE SPARK ARRESTER
1.Clean:
●
Spark arrester
*****************************************************
Cleaning steps:
WARNING
●
Select a well-ventilated area free of
combustible materials.
●
Always let the exhaust system cool
before performing this operation.
●
Do not start the engine when removing
the tailpipe from the muffler.
Not For Resale
www.SmallEngineDiscount.com