Service manual

3 - 35
CHK
ADJ
CLEANING THE SPARK ARRESTER
●
Remove the bolt 1.
●
Remove the tailpipe 2 by pulling it out of the
muffler.
●
Tap the tailpipe lightly with a soft-face
hammer or suitable tool, then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
the inner contact surfaces of the muffler.
●
Insert the tailpipe 2 into the muffler and
align the bolt holes.
●
Insert the bolt 1 and tighten it.
*****************************************************
Not For Resale
www.SmallEngineDiscount.com